APIO Steel rear ladder narrow type for JIMNY
Part number: 3620-14A
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
Product name: Steel rear rudder narrow type
Suitable: For Suzuki new Jimny JB64, Jimny Sierra JB74
* Spare tire size must be confirmed
Part number: 3620-14A
Coating: Semi-gloss black coating
Weight: Approximately 5kg
Mounting: Bolt-on equipped
Vehicle inspection: Vehicle inspection compatible product
Country of manufacture: Japan (Made in Japan)
* Design registered
Packing size: 700mm x 250mm x 150mm
Packing weight: Approximately 5.5kg
Introducing a narrow type steel rear ladder that can handle up to 205 / 80R16 (reference outer diameter 740 mm).
The square design matches the body shape of Jimny JB64 and Jimny Sierra JB74.
It is made of sturdy steel and can be used by staff weighing 75 kg without any problems.
Since it is mounted on the right side near the rear gate hinge, it can be used tough, and there is no influence such as interference on opening and closing the gate in the mounted state.
[Narrow type matching confirmed tire outer diameter]
・ YOKOHAMA GEOLANDAR M / T G003
Size: 205R16 Outer diameter: 736mm
・ BFGoodrich Mud-Terrain T / A KM3
Size: 205 / 80R16 Outer diameter: 740mm
* Installation has been confirmed up to the above outer diameter size.
[Difference in size between normal type and narrow type]
Normal type Center ladder outer width: Approximately 220mm
Narrow type Center ladder outer width: Approximately 190mm
Normal type Horizontal pipe (stepping) width: Approximately 180mm
Narrow type Horizontal pipe (stepping) width: Approximately 150mm
Installation is a prefabricated bolt-on installation. There is no need to make holes in the body. For details, please refer to the installation manual.
A scratch-proof rubber sheet is attached to the upper and lower rear gate contact parts.
・ This ladder is only compatible with the right side of the rear gate. It cannot be installed on the left side.
・ Please use the rear rudder when the rear gate is closed and the vehicle is stopped.