Description

Product name: Wide rear view blue mirror
Compatible with: Jimny JB64, Jimny Sierra JB74
Part number: 7109-64 (for JB64)
7109-74 (for JB74)
*This product cannot be used with other mirror parts or accessories.

[About installation]
Installation is relatively easy as it is a cover type. A Phillips screwdriver (number 2) is required to tighten the genuine mirror.

Product Description
A vast blue mirror is attached by covering the Jimny genuine room mirror (rear view mirror).

It has a high tightening effect by fully covering the back when viewed from outside the car. The back cover has a black logo printed on the black body, which is typical of APIO. It has a subtle assertion.

The mirror body uses a blue mirror. It significantly reduces the glare of the following vehicles’ headlights. It has a high anti-glare effect, supporting clear visibility without blurring with intense light.

This product is a gently curved mirror cut from a sphere with a radius of 3000 mm.

If the curvature of the mirror is increased (such as 1400SR), like a general curved mirror, a wider range can be reflected. However, the image reflected becomes smaller than the actual image, making it feel farther than the exact distance.

Therefore, this product is set to a curvature of 3000SR and balances a wide field of view and a natural sense of distance. Since it can reflect a broader range than the flat mirror of the genuine rearview mirror, the field of view area is expanded by up to about 1.6-1.7 times compared to the genuine rearview mirror.
Because it is a mirror cut from a uniform spherical curved surface, it can project a clear image without distortion.
Designed specifically for the vehicle model
The shape of this product is different for the Jimny JB64 and Jimny Sierra JB74. Since the Jimny Sierra JB74 has an anti-glare lever on the genuine mirror, the cover side of this product is shaped to avoid the lever. The Jimny JB64 has a design without a notch.
Please be careful not to make a mistake in your vehicle model selection when purchasing.
It is designed specifically for your vehicle model and can be used without interfering with the visor.

Caution
●This product cannot be used with other rearview mirror parts or accessories.
●This product is a gently curved mirror, so there is a difference in visibility and sense of distance compared to the original rearview mirror.
●When installing this product, you need a Phillips head screwdriver (No. 2) to tighten the original mirror.