Description

Product Features

• By optimally controlling the boost pressure of turbo cars, smooth boost and power up are achieved.
• By setting it for each vehicle model and setting a dedicated ratio, boost up is performed within the control range of the original ECU,
  minimizing the burden on the vehicle.
• Completely coupler-on design does not require any wiring processing such as power supply. It can be easily installed by completing it in the engine room.
• No complicated settings are required, and power is increased immediately after installation.
• All short parts necessary for installation are included.※ There are individual differences in how people feel about things such as acceleration feeling, improved response, and power feeling.※ Cannot be installed on vehicles equipped with ECU rewrite (including our TUNING ECU), ECU replacement, or electronic parts connected to the pressure sensor.
  ※ Cannot be installed on vehicles equipped with products other than genuine products and BLITZ AIR FILTER / AIR CLEANER series.

Lineup List

*The power and torque values ​​in the compatibility table and graphs are the output measurements of a standard vehicle and when a power conditioner is installed, measured using our chassis dynamometer.
* Output values ​​may vary depending on individual vehicle differences, etc. Please note that these are only reference values.
*This product cannot be installed on vehicles with modified ECU programs such as B-EMU/BLITZ TUNING ECU, or vehicles equipped with air cleaners other than the original or BLITZ.
*The vehicle-specific harnesses for this product, including replacement parts, are not sold separately.

● This is an optional harness that connects Thro Con and Power Con, allowing the functions of each product to be linked.
● By connecting Thro Con and Power Con with this harness, you can use Thro Con’s “Smart Mode (5 modes in total)”, which controls the accelerator response according to the engine load.
● By setting the Thro Con option, you can turn the Power Con’s operation control ON/OFF according to the throttle opening.
It is possible to control the power-up only when necessary, reducing the burden on the engine.
● All wiring is a coupler-on connection, and the short parts required for fixing are included.
* This product does not function alone.
* The interlocking function of Thro Con and Power Con using this product is different from Power Thro.

Thro Con-Power Con connection harness

Crown Crossover: Maximum power output increased by approximately 9.5 PS and maximum torque increased by approximately 9.7 Nm!
Vehicle: CROWN CROSSOVER
Model Year: 2022/09-
Model: TZSH35
E/G Model : T24A-1ZM-1YM
Transmission: AT
Normal Power:294.0PS
Peak Power :304.1PS (9.5PS UP)

RX500h: Achieves an increase in maximum output of approximately 12.4 PS and maximum torque of approximately 8.0 Nm!
Vehicle: RX500h
Model Year: 2022/11-
Model: TALH17
E/G Model : T24A-1ZM-1YM
Transmission: AT
Normal Power:322.0PS
Peak Power :334.4PS (12.4PS UP)