Description

Front Grill [Painted] – 76,550 yen / [Unpainted] – 64,450 yen
* September 2017-There are settings for vehicles up to July 2020 and for vehicles after August 2020. Please let us know the model year when ordering.
・ FRP gel coat finish
・ Genuine T mark (Toyota mark) emblem (millimeter-wave radar) can be installed
・ Genuine (normal) bumper can also be installed
A horizontal fin-type front grill with the motif of LEXUS GX460. By laying the fins sideways, it brings a visual effect that emphasizes the sense of wideness. It brings an elegant and luxurious atmosphere that sets it apart from the genuine grill. It also supports the presence or absence of a front camera, so it can be installed on any vehicle.

Front bumper spoiler – 197,500 yen
For late-model (September 2017-)
・ FRP gel coat finish
・ LED lamps (5 on each side) included
・ Fog lamps are bumper replacement type spoilers that have established a spindle-like big face that uses genuine products
. At the bottom, there is also a wing-shaped spoiler that can be said to be a classic of Elford Aero. We have established a wide and low style. In addition, 5 domestic LED day lamps are placed on one side of the side duct. It improves visibility by using it as a day lamp.

Front Half Spoiler CARBON+FRP – 116,800 yen / FRP – 80,800 yen
For standard bumper vehicles for late-model (September 2017-　)
Type of front to cover the normal bumper spoiler. By increasing the profound feeling of the front, it produces a powerful low form even at the normal vehicle height. You can choose from two types, all FRP specifications, and partial carbon specifications.
A plastic mesh net is standard equipment on the duct part of the spoiler.
It has a high-quality finish with attention to detail.
* Optional parts A
day lamp panel with 5 Japanese LED bulbs embedded on one side is available as an option. (See below)

LED Day Light Panel – 64,500 yen
For late-model (September 2017-) Elford half spoiler only
-FRP base finish A
day lamp panel with 5 Japanese LED bulbs embedded on each side in the Elford front half spoiler. By installing a day lamp, you can dress up and improve the visibility of the vehicle at the same time. Furthermore, since the connection coupler also uses a waterproof type, it is a safe specification that minimizes the risk of lighting defects.

Rear bumper spoiler – 228,450 yen / LED Reflector – 15,450 yen
For late-model (September 2017- ) * For gasoline vehicles, there are settings for vehicles from September 2017 to July 2020 and for vehicles after August 2020. Please let us know the model year when ordering.
・ FRP unpainted gel coat finish
・ 2TR-FE (2.7L gasoline car) can be installed
・ 1GD-FTV (clean diesel car) can be installed
・ Stainless steel bypass muffler included
* Realistic left and right exhaust are realized.
-Reflector included
-Spare tire can be installed
* The tow hook on the rear side needs to be removed
Elford’s standard replacement-type bumper spoiler realizes a mufflerless look. Real exhaust is realized from the genuine LEXUS LS tail finisher built into the bumper by the attached stainless steel bypass muffler. We will change it to an elegant and exciting style that is incomparable to the normal rearview.

Sold separately: LED reflector
By replacing and wiring from the genuine reflector, the small / brake double lighting is realized with 30% light emission when the small lamp is lit and 100% light emission when the brake lamp is lit. Not only the rearview dress-up effect but also the visibility from the following vehicle is improved and the rear-end collision prevention effect is also demonstrated.

Rear wing [Unpainted] – 63,900 yen /[Painted] – 73,000 yen
Common to all cars (compatible with front, middle, and late models)
-FRP white gel coat finish.
-Double-sided tape type easy installation.
Since it is a type of rear wing that can be placed over the genuine rear spoiler, the genuine high-mount stop lamp, and rear wiper brain functions can be used as they are. From the normal hanging shape, it is slightly larger and extends backward. The raised line enhances the sporty feeling.

20mm over fender for Elford Aero – 70,000 yen 
For late-model (September 2017-)
· FRP-made gel coat finish
· 20mm wide (one-sided)
· All 6 pieces in El Ford Aero (before and after) for the Late By combining, access to the side view of the cement addition, by increasing the sense of wide, powerful a We will change to purity. It is 20 mm wide (one side) corresponding to the 30 mm wide tret spacer.

Overfender wide 20mm – 65,000 yen 
For the late model (September 2017-)
・FRP gel coat finish, unpainted product
・Rear divided into 2 parts, 6 pieces in total.
20mm wide (one side) overfender for normal bumpers.
It has a natural fit that looks like a genuine product and creates a beautiful line that does not feel uncomfortable.
In addition to the wide and powerful exterior, the side view accentuates individuality.
In addition, the mudguard can be installed without removing it to prevent mud splashes.
*Vehicles with genuine OP side molding require the processing of the product (door part).
* Structural changes are required due to changes in vehicle width.

Rear half spoiler & 4-piece muffler with LED reflectors – 228,950 yen
For late-model (September 2017- ) * For gasoline vehicles, there are settings for vehicles from September 2017 to July 2020 and for vehicles after August 2020. Please let us know the model year when ordering.
・ Conforms to safety standards (vehicle inspection compliant product)
・ FRP unpainted gel coat finish
・ Dedicated reflector included
・ Bottom spare tire can be installed
* The rear side tow hook must be removed to install the muffler
It is a set product of a half-shaped rear spoiler that is attached over a normal standard bumper and a dedicated muffler for vehicle inspection.
Since it does not use a genuine reflector, it is a half-type but has a big makeover from the original.
Stainless steel is used for the attached dedicated muffler. The tail end uses an oval-shaped 115mm tail for a simple yet powerful rearview. Equipped with a tailslide function, the spoiler can be adjusted to the desired protrusion width.
* The product has holes for the rear corner sensor and back sensor.
If the car is not equipped, please purchase a dummy sonar (sold separately).
Sold separately: LED reflector
By replacing and wiring from the genuine reflector, the small / brake double lighting is realized with 30% light emission when the small lamp is lit and 100% light emission when the brake lamp is lit. Not only the rearview dress-up effect but also the visibility from the following vehicle is improved and the rear-end collision prevention effect is also demonstrated.

Sold separately: Dummy
sonar for rear half spoiler Dummy sonar for cars without the genuine optional clearance sonar. Attach it to the back of the product with double-sided tape.
* The product is not painted.
* “Dummy sonar for rear half spoiler” can also be purchased at the online shop.

Rear half spoiler & 4-piece muffler type X with LED reflector – 258,500 yen

For late-model (September 2017- ) * For gasoline vehicles, there are settings for vehicles from September 2017 to July 2020 and for vehicles after August 2020. Please let us know the model year when ordering.
・ Conforms to safety standards (vehicle inspection compliant product)
・ FRP unpainted gel coat finish
・ Dedicated reflector included
・ Bottom spare tire can be installed
* The rear side tow hook must be removed to install the muffler

It is a set product of a half-shaped rear spoiler that is attached over a normal standard bumper and a dedicated muffler for vehicle inspection.
Due to the shape that does not use a genuine reflector, a major makeover from the original is realized even though it is a half-type.
Stainless steel is used for the attached dedicated muffler. The dedicated muffler is a type X that uses a 120 x 85 mm dual square tail. Produces an elegant and gorgeous rearview like no other. The tail end is equipped with a tailslide function that can be adjusted to the desired protrusion width.

Sold separately: LED reflector
By replacing and wiring from the genuine reflector, the small / brake double lighting is realized with 30% light emission when the small lamp is lit and 100% light emission when the brake lamp is lit. Not only the rearview dress-up effect but also the visibility from the following vehicle is improved and the rear-end collision prevention effect is also demonstrated.

Sold separately: Dummy
sonar for rear half spoiler Dummy sonar for cars without the genuine optional clearance sonar. Attach it to the service hole of the product body with the attached double-sided tape.
* The product is not painted.
* “Dummy sonar for rear half spoiler” can also be purchased at the online shop.

FRP Lightweight aero bonnet – 128,800 yen (Carbon – 165,800 yen)

For late-model ( September 2017- )
, base finish
, split rain protector included
, support rod included
* Genuine bonnet damper cannot be used

A lightweight aero bonnet with two types, FRP specifications, and partial carbon specifications.
While taking advantage of the genuine bonnet shape, the triple louvers arranged on both sides give the taste of the ultimate sports. The rear end of the bonnet is flapped in a flip-up shape to rectify the wind that hits the windshield.
In addition, the triple louvers arranged on both sides are real ducts, but since a removable “split rain protector panel” that is excellent in rainwater countermeasures is attached, consideration is given to measures against flooding in the engine room. The engine.
By installing a lightweight aero bonnet, the weight of the front is reduced and a light steering feel is also realized.

Aero step cover – 94,700 yen
Compatible with all models (for standard sidestep installation)
・ Gel coat finish made of FRP
・ With Elford emblem It
is possible to lower the ground height by 60 mm by covering it with a genuine plate-type sidestep. Achieves sporty styling by balancing the side view volume when an externally made aero and genuine OP aero are installed. In addition, one of the features is the modeling that supports separate paintings. The amount of overhang of the main body has also been taken into consideration so as not to impair the ease of getting on and off.
(Ground height) 60mm down from the original

 
Sonic Art Alloy Wheels – 388,200 yen
The concept of Sonic Art is a “Fusion of performance and beauty of appearance”. By adopting a cover type that has little effect on the design and combining it with the concave shape that is dropped from the outermost circumference of the rim to the center part, it has a spoke shape that is supple and stretches from the center to the rim end. In addition to a sophisticated design such as diamond cutting on the spoke surface, the flow-forming method realizes the ultimate lightness (13.4 kg/piece). Although it is 22 inches in size, it is lighter than the genuine wheel, so it also emphasizes athletic performance. Sonic Art is the “lightest and most powerful wheel for Prado”, which is suitable for calling it art that combines performance and aesthetics.
Size: 22 x 9.5J 6H-139.7 Inset +20
Color: Sonic Black / Diamond Cut Face
Flow forming method
Accessories: Aluminum center cover set, Aluminum black air valve
Standard: JWL, VIA standard-compliant product

Front underwing for the exclusive use of Modellista spoiler – 64,200 yen
For models with a Modellistaspoiler for late-model (September 2017-)・ FRP gel coat finish This is a plus-on type under the wing that is attached to the bottom of the modellista spoiler. The forward protrusion and the expansion to the bottom increase the profound feeling of the front and change it to a more aggressive style. Since the tip of the fin is stepped down, it can be used as a boundary line when painting separately, creating a casual and fashionable look.

LED day lamp panel for Modellista spoiler [Unpainted]  – 64,500 yen / [Painted] 75,500 yen
For the model ( September 2017-) Modellista front spoiler only
-FRP substrate finish * A part of the Modellista front spoiler needs to be cut to install the day lamp panel.
It is a day lamp panel with 5 Japanese LED bulbs embedded on each side in the Modellista front spoiler. By installing a day lamp, you can dress up and improve the visibility of the vehicle at the same time. Furthermore, since the connection coupler also uses a waterproof type, it is a safe specification that minimizes the risk of lighting defects.

20mm Overfender for Modellista spoiler – 70,500 yen
For late-model (September 2017-) Modellista spoiler-equipped car
・ FRP gel coat finish
・ 20mm wide (one side)
・ All 6 pieces configuration By combining with the Modellistaspoiler (front and rear) for the late model, a wide feeling Not to mention emphasizing, by adding an accent to the side view, we will change it to a balanced and powerful purity. It is 20 mm wide (one side) corresponding to the 30 mm wide tret spacer.

Front underwing for TRD spoiler only – 64,500 yen
For vehicles equipped with TRD spoiler for late-model (September 2017-)・ FRP gel coat finish This is a plus-on type dedicated underwing that is attached to the bottom of the TRD spoiler. The forward protrusion and the expansion to the bottom will increase the profound feeling of the front and will change to a more aggressive styling. Since the tip of the fin is stepped down, it can be used as a boundary line when painting separately, creating a casual and fashionable look.

20mm Overfender for TRD spoiler only – 70,000 yen
For late-model (September 2017-) For vehicles equipped with TRD spoiler
・ FRP gel coat finish
・ 20mm wide (one side)
・ All 6 pieces configuration By combining with TRD spoiler (front and rear) for late model, a wide feeling Not to mention emphasizing, by adding an accent to the side view, we will change it to a balanced and powerful purity. It is 20 mm wide (one side) corresponding to the 30 mm wide tret spacer.

Vertical front grill – 52,500 yen
For late model
*There are settings for vehicles from September 2017 to July 2020 and for vehicles after August 2020. Please let us know the model year when ordering.
・FRP gel coat finish, unpainted product
・Genuine T mark (Toyota mark) emblem millimeter wave radar) can be
installed.
Changing the arrangement of the vertical slots produces a front face that is a little different from the genuine one. Ribs are provided on the edge of the opening, so you can claim luxury and individuality by coloring separately. In addition, by adopting a plastic mesh net for the opening, the radiator part is surely protected and blindness is improved.

Protector lamp stay – 102,500 yen
For the late model (September 2017-)
・76.3Φ steel pipe powder coating finish
・Stainless steel skid plate included
・Body weight: 11.5kg
・Fog lamps up to 200Φ can be installed.
*When installing a stone guard with a 200Φ lamp, the guard may interfere.
* For standard (normal) bumpers
It is a lamp stay that enables the installation of a large lamp that is indispensable for off-road driving.
A stainless steel skid plate is standard equipment at the bottom of the product that gives the Prado a cross-country feel.

Stealth side step – 94,700 yen
For all vehicles
, 50mm x 90mm steel pipe with powder coating finish, nonslip rubber included

A thin side step that uses an oval shape.
The oval-shaped pipe has a thickness (height) of only 50 mm, so it does not sacrifice the ground clearance and emphasizes the height of the vehicle. However, the step surface (tread surface) has a depth of 90 mm, which is close to a flat shape, making it easy to put your feet on. In addition, if you use the included anti-slip rubber, you can get on and off easily without slipping even in rainy weather. The main body and mounting stay are finished with a semi-matte black powder coating, making it inconspicuous.
Since a strong steel pipe is used for the material, it also plays a role in protecting the side sill when driving on rough roads.
In addition, the main body has a sliding function, so it is possible to adjust the width according to custom, etc. And the products are made in Japan with peace of mind that they are manufactured in Japan.
Despite being a tough existence, it erases its presence. It’s a stealthy sidestep.

Roof light mount panel – 112,000 yen
Original 10-inch LED bar light (2 units) included set
for all cars
・FRP gel coat finish unpainted product
・Moonroof car compatible
・Two-piece configuration of the main body and top panel
It is a dedicated panel that mounts a 10-inch LED bar lamp on the roof. Since the bar lamp can be installed without installing a roof rack, etc., the vehicle height does not change, and the center of gravity does not rise, allowing off-road driving while maintaining driving stability. The product consists of two pieces, the main body, and the top panel, and it is easy to adjust the optical axis of the lamp. Installation is fixed with double-sided tape and screws on the genuine molding part installed on the roof, so there is no need to worry about rain leaks.

Rear balance panel [unpainted] – 55,980 yen / [Painted] – 68,000 / [Painted 2 Colors] – 72,500 yen
For the late model (September 2017 – May 2021)
*Please note that vehicles after June 2021 cannot be installed due to the change in the position of the back sonar.
・FRP gel coat finish, unpainted product
・For genuine (normal) bumper
*Toyota genuine hitch receiver is sold separately

Not only does it beautifully hide the notch in the processed part of the genuine bumper when installing the Toyota genuine hitch receiver, but it also adds an off-road taste to the rearview by enlarging the panel body and giving it a design. For installation, after installing the genuine hitch receiver, it is fixed to the genuine bumper with double-sided tape and screws, so if the vehicle is already equipped with the genuine hitch receiver, it can be installed more easily.

Bloodstock SL (super light) [20×8.5J inset +15] -86,400 yen /[20×8.5J inset +6] – 86,400 yen 
In order to realize a lightweight and high-performance wheel, we have also been particular about the manufacturing method, and by adopting the flow-forming manufacturing method, we have achieved a weight reduction that is comparable to a forged wheel (11.5 kg/wheel).
In addition, the world’s first anti-air leak system that prevents air leaks during off-road driving and an inner lock system*2 that prevents tires from falling off have been adopted to achieve a high level of off-road driving performance. The design utilizes the features of conventional Bradstock designs, such as irregularly shaped holes that have undergone three-dimensional processing, while achieving a beautiful form that can be said to be the ultimate round hole with the largest opening in Bradstock history in order to reduce weight and improve heat dissipation. formation. Considering the combination with the rugged off-road tires of recent years, the rim has a simple rim shape to emphasize the balance of the appearance. Next-generation blood stock born from a new idea. That is “Bloodstock SL (super light)”.

Size:
20×8.5J 6H-139.7 Inset +15 For normal car
20×8.5J 6H-139.7 Inset +6 For cars with over fender

Color
Disc: Matte Black + Milling Finish
Rim: Mirror Polish + Matte Coated Rim Finish
Flow Forming Method
Anti Air Leak System Adopted [Patent Pending]
Inner Lock System Adopted [Patent Pending]

Accessories: Center cap set, lightweight aluminum air valve
Standards: JWL, JWL-T, VIA standard-compliant product

Bloodstock 1 piece  Alloy Wheels – 288,200 yen
Bloodstock 1 piece Alloy Wheels [Matte Black] -58,400 yen /[Silver Polish] – 59,600 yen / [Gloss Black] – 59,600 yen
The Bradstock design is based on a round-hole dish design that boasts overwhelmingly high strength performance in terms of rigidity and strength. However, the dish design has disadvantages such as a large disk surface area, increased weight, and poor heat dissipation. Therefore, the design of the bloodstock is different from the conventional round hole dish design in order to eliminate the disadvantages. The round hole, which is the core of the design, has been 3-dimensionally processed to create a unique shape that fuses with the dish and spokes. As a result, by widening the hole opening, the weight increase is suppressed and heat dissipation is improved.
Of course, it’s not about performance, but the unique design of Bradstock creates a beautiful form like no other. Milling (cutting) the edge of the window opening gives it brilliance, giving it both daring and high quality. I believe that Bloodstock has been recognized as a classic design that never goes out of fashion by maintaining a consistent design concept from its birth to the present.
A sense of stability and security because it is a classic. That’s the beauty of Bloodstock.
Size: 17×8.0J 6H-139.7 Inset +30
Accessories: Center cap, air valve
Standards: JWL, JWL-T, VIA standard-compliant product

Bloodstock 1 piece 2 Alloy Wheels [Matt black/Mill dimple] – 66,870 yen / [gloss black/polished rim] – 65,870 yen / [silver polish] – 65,870 yen
Size: 17 x 8.0J 6H-139.7 Inset ±0
Based on one piece of Bloodstock, it is a model specialized for vehicles with over fenders such as Land Cruiser Prado, FJ Cruiser, and Hilux. Round holes, which are the core of the design, are processed in three dimensions, and milling (cutting) is performed on the edges of window openings and irregularly shaped holes. A method to fix the cap is adopted.
Stronger, clearer, one-size-only evolution model. That is Bloodstock 1 piece 2.
Accessories: Center cap set, air valve
Standards: JWL, JWL-T, VIA standard-compliant product

Matt black/Mill dimple
gloss black/polished rim
Silver polish

Hub-centric wheel spacer – 62,800 yen
30mm thick wheel spacer with integrated hub ring developed exclusively for Toyota vehicles. It has a size setting suitable for aero over fenders.
■ Hub diameter: 106.1mm
■ Made in Japan
■ Nut size: M12 x 1.5
■ Outer diameter: 179.0mm
●Accessories: Penetration nuts 12 x 1.5 24 pieces, adapter
For 1 car: 1 set of 4 sheets