Name: ENDLESS RacingMONO6 Rally Front for GR Yaris
Availability: InStock

ENDLESS RacingMONO6 Rally Front for GR Yaris

Product Code: FAZMYGXPA16 / Old Part Number : FAMYGXPA16
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered
with this shipping, we may request an additional shipping charge after the buyer place the order.
4.5% deduction when paying via Bank/WISE Payment

Description

The ENDLESS Racing MONO block series, which is equipped with a pipe guard and has further increased rigidity from Racing MONO
6, has been developed by thoroughly pursuing rigidity by forging and integral molding. The newly released “Racing MONO6 Rally & Racing MONO4 Rally” uses the latest CAE technology and uses new materials to succeed in increasing the rigidity at higher temperatures.
Compared to the conventional Racing MONO block series, Racing MONO6 Rally has 110% higher rigidity, and Racing MONO 4 Rally has 106% higher rigidity. Furthermore, by designing to guard the brake pipe, damage to the pipe due to flying stones during hard driving is prevented.

Compatible model
TOYOTA Toyota
GR Yaris
* The kit attached to the rotor can be installed on vehicles equipped with RC-grade 17-inch wheels.
GXPA16
genuine rotor (outer diameter x thickness)
FΦ356 x 28 RΦ297 x 18

Specifications
Product name: System inch up kit
Manufacturer part number: FAMY GXPA16
Rotor: 370 x 34
2PCS pad: RCP121

Delivery Leadtime
Back-order, made-to-order production about 2 months ~
ENDLESS BRAKE CALIPER

RacingMONO6 Rally caliper specifications

・ Weight: 2880g
・ Dimensions: D177mm × H72mm × W305mm
・ Compatible rotor diameter: φ355 ~ φ400
・ Compatible wheel size (* 1): 18inch ~
・ Caliper body color: Carbide aluminate (* 2) (* 3)* 1 compatible Wheel vary depending on the wheel brand and size.
* Please note 2 Color unevenness occurs, but this is not an aluminate abnormality.
* 3 The color of the caliper body can be selected only for hard aluminate.

RacingMONO6 Rally Kit contents
-Caliper body (super hard aluminate) -Dedicated caliper brake pad -Mounting bracket -Large diameter brake rotor -Brake line for the caliper* E-slit rotor is used as a standard for this product. * Tough ram coat is adopted as the standard for the rotor bell housing, and it is not possible to change to another color.

Selectable brake pads
The caliper dedicated brake pads use a method in which the material is selected so that customers can select the brake pads that suit their driving stage.

RacingMONO6_Rally dedicated brake pad material list
TYPE-R / MX72 / MX72_PLUS / CC35_type-E (+23,000 yen) / W003 (+15,000 yen)

About bell housing order color
The standard color of the brake rotor “Racing” and the caliper kit 2-piece type / 3-piece type bell housing is a blue aluminate finish except for some products. (* 1)
Special colors can be ordered upon request. (If you are concerned about fading, we recommend the custom color “Tough Ram Coat”.) Please choose from the colors listed below.

※1For the Racing MONO series, the tough ram coat is the standard-setting.
※The colors shown may differ from the actual colors depending on your display.
The price of the tough ram coat is 33,000 yen including tax (main unit price 30,000 yen) for each of the left and right brake rotors.
Other aluminate colors are 11,000 yen including tax (main unit price 10,000 yen) for the left and right brake rotors.

※Due to the characteristics of the product, the racing MONO block series and MONO6 Sports cannot be changed in aluminate color.