Description

High mount stop lamp flashing kit compatible with Toyota RAV4 50 series RAV4 PHV

When the product is installed, the high-mount stop lamp will flash automatically in conjunction with the brake.
When you are stuck in a traffic jam or waiting at a traffic light, you can notify the following vehicles of your vehicle’s presence and help prevent unnecessary rear-end collisions.
Easy to install with the complete coupler on! Simply connect the product to the connector on the back of the high-mount stop lamp by sandwiching it.
Of course, it is easy to remove!

[Compatible car models]
◎Toyota RAV4 50 series/RAV4 PHV

*The following actual vehicle operation has been confirmed
Toyota RAV4 PHV
Model: 6LA-AXAP54 Grade: Black tone
Year: 2021 (August R3) registered car
Message from the shop
Until a while ago, driving schools recommended pumping the brakes (pressing the brakes in small steps).
Older cars do not yet have ABS (anti-lock braking systems), and pumping the brakes not only prevents the tires from locking up, but also flashes the brake lights and warns the cars behind you. It also had the effect of letting you know when to slow down.
Or you can show your love with five brake lights…

It is common practice to flash hazard lights to notify following vehicles at the end of a traffic jam, but if the vehicle is not at the end of a traffic jam, pumping the brakes (pressing the brakes in small steps) is used to flash the brake lights. By doing so, you can make the following vehicle think, “Huh?”

It is very important to use the brakes and hazard warnings to warn others to avoid being involved in an accident.

No matter how carefully you drive and how conscious you are of safety, being rear-ended by a careless third party can still happen, no matter how careful you are.

It’s not just cars that get dented by being dug in.
To protect your vehicle, which is your property, the safety of your passengers, and yourself, ensuring the safety of the rear of your vehicle and appealing to following vehicles is an important factor.

Even if the car behind you thinks it’s annoying to have your brake lights turned on so many times, it’s proof that you’ve succeeded in alerting them in the sense of “getting them to pay attention to your car.”

That’s where the “High Mount Stop Lamp Flashing Kit” comes in!
By installing this product, you can expect the same effect as pumping brakes, with the high-mounted stop lamp flashing just by stepping on the brake without having to be conscious of it.
In addition, since the light only flashes when the brake pedal is pressed, the light will immediately turn on normally when the light is stopped, such as when waiting at a traffic light, so it will not cause any unnecessary irritation to vehicles behind you.

In addition, the product is a complete coupler-on, and the installation location is easily accessible, so even people who are not familiar with cars can install it in just 5 minutes.
Of course, it is also easy to remove.
Just insert it between the genuine connectors, so it won’t damage the original car wiring.
moreover! Now the product can also change the blinking pattern! And since it is possible to switch to the original state (blinking OFF), there is no need to take the trouble to remove the product during vehicle inspection!

■Functional explanation■
– When you step on the brake (keep stepping on it), the high-mount stop lamp will flash repeatedly and then return to its normal lighting state.
– It is possible to change the blinking pattern and switch to the original state (non-blinking).

■Lighting pattern■
・Flashes 3 times x repeats 2 times, then turns on normally (initial)
– Normally lights up after blinking 3 times
・Normal lighting (blinking OFF, same as genuine)

■Switching method■
The lighting pattern will change when you start the engine and press the brake 7 times in a row at a pace of about 1 time/1.0 seconds.
Every time you press the brake 7 times in a row, the lighting pattern will change repeatedly in the following order.
Flashes 3 times x repeats 2 times, then turns on normally
↓
After blinking 3 times, it lights up normally.
↓
Normally lit

[Caution] *If you brake frequently on a slope or put your foot on the brake, and the brake light flashes 7 times in a row, the flashing pattern may change on its own.

■About vehicle inspection■
Please return the lights to normal when entering the vehicle during vehicle inspection.
Regarding the vehicle inspection, depending on the inspector’s judgment, there is a possibility that the vehicle will not pass the vehicle inspection. We do not guarantee 100% vehicle inspection compliance. Please understand this before purchasing.
*The flashing mode of the high-mounted stop lamp in this product is intended for driving on private property such as events and racing tracks. Please note that it may be a violation if used on public roads.

■Product contents■
・Wiring with connector x 1
・Plastic remover (spatula) x 1
*Installation and handling instructions are not included. Please check the images and videos on the product page for installation and switching methods.