Enlarge Power Output Option Coupler for Toyota Cars
Original price was: ¥10,000.¥7,000Current price is: ¥7,000.
Part Number: TCS-01
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
Description
TOYOTA Yaris Yaris Cross GR Yaris Alphard Vellfire C-HR Harrier 80 series Aqua Sienta Land Cruiser 300 series Drive recorder ETC Accessory power supply Small lamp interlocking Constant power supply 10A 30A Room lamp interlocking Earth Power extraction Optional coupler 13 pin Branch type
point
Continuous power supply (10A), constant power supply (30A), ACC, small lamp interlocking, room lamp interlocking power supply + ground can be obtained with this one!
Just plug in your car’s optional coupler!
An indispensable item for tinkering with electrical equipment!
You can reduce installation costs for ETC, drive recorders, LED illumination products, etc.
Message from the shop
◎It can be used even if you already use the optional coupler!
The coupler of this product is a branch type.
Even if you are already using the optional coupler in your car, you can still use the original device and get additional power by inserting the original coupler into the product’s female connector.
◎The wiring that can be taken out differs depending on the car model!
This product can take out up to 5 types of power sources (continuous power supply (10A), constant power supply (30A), accessory power supply, small lamp interlocking, and room lamp interlocking).
Depending on the type of wiring, you may not be able to extract power from your car.
Before purchasing, please check the wiring that can be extracted from your car using the “Power supply extraction option coupler compatibility table” below.
*BAT (30A), TAIL, and ROOM (-) can only be used on some car models.
◎By using the I-shaped tap, you can easily connect the wiring!
You can easily access the power by simply pinching the included I-shaped tap with pliers!
An indispensable item when installing electrical equipment such as drive recorders, ETC, and LED illumination products!
[Compatible car models]
◎Harrier
Model: MXUA80/MXUA85/AXUH80/AXUH85
Year: June 2020 (Reiwa 2)
Installation location: Back of glove box, top right
Removable wiring: Accessory power supply/earth/constant power supply (10A)
◎Sienta
Model: MXPL10G/MXPL15G/MXPC10G
Model year: From August 2022 (Reiwa 4)
Installation location: Inside the passenger seat kick panel
Removable wiring: accessory power supply/room lamp interlocking (-)/earth/constant power supply (10A)
◎Yaris
Model: MXPA10/MXPH15/KSP210/MXPH10/MXPA15
Model year: February 2020 (Reiwa 2) to December 2023 (Reiwa 5)
*Operation has not been confirmed on cars that have undergone some improvements after January 2024 (R6).
Installation location: Upper right side with glove box removed
Retrievable wiring: Accessory power supply/Small lamp interlocking/Room lamp interlocking (-)/Ground/Constant power supply (10A/30A)
◎Yaris Cross
Model: MXPB10/MXPB15/MXPJ10/MXPJ15
Model year: August 2020 (Reiwa 2) to December 2023 (Reiwa 5)
*Operation has not been confirmed on cars that have undergone some improvements after January 2024 (R6).
Installation location: Upper right side with glove box removed
Retrievable wiring: Accessory power supply/Small lamp interlocking/Room lamp interlocking (-)/Ground/Constant power supply (10A/30A)
◎GR Yaris
Model: GXPA16/MXPA12
Model year: From September 2020 (Reiwa 2)
Installation location: Upper right side with glove box removed
Removable wiring: Accessory power supply/Small lamp interlocking/Room lamp interlocking (-)/Ground/Constant power supply (10A)
◎Alphard/Vellfire
Model: AGH30W/AGH35W/GGH30W/GGH35W
Model year: January 2020 (Reiwa 2) to May 2023 (Reiwa 5)
Installation location: Above the passenger seat kick panel
Removable wiring: Accessory power supply/earth/constant power supply (10A)
◎C-HR
Model: NGX10/NGX50/ZYX11
Model year: November 2019 (Reiwa 1) to July 2023 (Reiwa 5)
Installation location: Above the passenger seat kick panel
Removable wiring: Accessory power supply/earth/constant power supply (10A)
◎Aqua
Model: MXPK10/MXPK11/MXPK15/MXPK16
Year: From July 2021 (Reiwa 3)
Installation location: Upper right side with glove box removed
Retrievable wiring: Accessory power supply/Small lamp interlocking/Room lamp interlocking (-)/Ground/Constant power supply (10A/30A)
◎Land Cruiser 300 series
Model: FJA300W/VJA300W
Model year: From August 2021 (Reiwa 3)
Installation location: Passenger side, behind the glove box
Removable wiring: Accessory power supply/Small lamp interlocking (ROOM (-))/Earth/Constant power supply (10A)
*For the Land Cruiser 300 series, the ROOM (-) power source is located at the TAIL wire of the wiring coming out of this product. The TAIL line does not come to the coupler on the vehicle side.
*BAT (30A), TAIL, and ROOM (-) can only be used on some car models.
[Product specifications]
– Simply plug it into the optional coupler on the passenger seat to access 5 types of power sources (accessory power, small lamp interlocking, room lamp interlocking (-), constant power (10A, 30A)) + ground.
*There is no need to insert a fuse.
*Please check the shape of the optional coupler near the passenger seat glove box and kick panel of your car before purchasing.
*For the location of the optional coupler, please check the installation location of the compatible vehicle model listed above.
[Product contents]
・Optional coupler (branch type)
・I-shaped tap (electro tap) x 6
*Instruction manuals etc. are not included.
◎A versatile coupler that allows you to take out 5 types of power + ground just by inserting the optional coupler!
◎Easy to install! Just plug it into the optional coupler at the foot of the passenger seat!
◎Uses an I-shaped tap that allows you to quickly branch wiring with pliers!
◎You can save on installation costs for drive recorders, ETC, LED illumination products, etc.!
◎By inserting the coupler that was originally inserted into the female connector of the product, you can get additional power while using the original device!
[How to check with a tester]
●Continuous power supply (BATT 10A/BATT 30A)/+
With the engine OFF, connect a tester to the “BATT 10A” or “BATT 30A” wiring and the product’s GND/- or body ground (-) to check for electricity.
●Accessory power supply (ACC)/+
Press the start button once without stepping on the brake, connect a tester to the “ACC” wiring and body ground (-), and check for electricity.
*Depending on the grade of Sienta, in the initial stage, even if you press the power switch once without stepping on the brake, the ignition may turn on and the ACC state may not be activated.
In that case, if you want to check if the power is on, please turn on the ACC mode setting in the navigation customization settings (ACC customization).
●Small lamp interlocking (TAIL)/+
Turn on the light and connect a tester to the “TAIL” wiring and the product’s GND/- or body ground (-) to check for electricity.
●Room lamp interlocking (ROOM)/- (*Caution minus control)
Open the door with the room lamp switch linked to the opening/closing of the door, and connect a tester to the “BATT/+” wiring and “ROOM” wiring to check for electricity.
*When connecting the clip side of the voltage tester to the “continuous power supply (BATT 10A/BATT 30A)/+”, wrap the entire clip of the voltage tester with insulating tape, etc., so that it is completely insulated so that no metal is exposed. Please. If you touch even the slightest bit of metal on the car body, it may cause a short circuit. If you are concerned, always put a fuse on the power supply side wiring so that the fuse on the car side will not blow even if there is a short circuit.
●GND/-
Please connect a tester to the “GND” wiring and the product’s constant power supply (BATT 10A/BATT 30A)/+ to confirm power supply.
*A tester is not included, so please prepare it yourself.
【Notes】
*BAT (30A), TAIL, and ROOM (-) can only be used on some car models.
*If you take out the power source of BATT 30A/+ and connect it to a large-capacity electrical component, please connect it to the body ground or battery (-) instead of the GND wire (earth) of this product.
*For those who have basic knowledge and know how to install. We cannot provide any installation support.
*Instruction manuals etc. are not included.
*Please note that under no circumstances will we be able to accept returns or exchanges after installation.
*If the wires touch each other, there is a possibility of a short circuit. Wrap unused wires with insulating tape to prevent them from coming into contact with each other to prevent short circuits.
*Please note that there may be small scratches caused during the manufacturing process.
*Please perform installation work at your own risk.
You must be logged in to post a review.
You may also like…
-
Enlarge Auto Brake Hold Kit for Yaris Cross
Original price was: ¥15,000.¥13,000Current price is: ¥13,000.Compatible with Yaris/Yaris Cross -
Enlarge Vehicle Speed or P Shift Auto Door Lock Kit for Yaris
Original price was: ¥17,000.¥16,000Current price is: ¥16,000.GR Yaris/Yaris/Yaris Cross -
Enlarge Engine Auto ON/OFF [Idling Stop] Canceller Kit for GR Yaris
Original price was: ¥12,000.¥11,000Current price is: ¥11,000.Compatible with GR Yaris
Reviews
There are no reviews yet.