Description

Toyota Prius PHEV 60 Series High Mount Stop Lamp Position + Tail Lamp Flashing Kit Flashing Switchable Fully Coupler-On

When the product is installed, the high mount stop lamp will automatically flash in conjunction with the brake.
When in a traffic jam or waiting at a traffic light, it will help to alert following vehicles to the presence of your vehicle and prevent unnecessary rear-end collisions.
Completely coupler-on for easy installation! Just connect the product to the connector on the vehicle body.
Of course, removal is also easy!

Compatible models: Toyota PRIUS 60 Series/PRIUS 60 Series PHEV
[Model] MXWH60/MXWH61/MXWH65/ZVW60/ZVW65
[Year] January 2023 (Reiwa 5) onwards

*Not compatible with X grade

*Please note that this product is not compatible with aftermarket high mounts.
*It also flashes/lights when automatic braking is performed during radar cruise control.

Until a long time ago, driving schools and other places recommended pumping the brakes (pressing the brakes in small increments).
Old cars did not yet have ABS (anti-lock braking systems), so pumping the brakes not only prevented the tires from locking, but also flashed the brake lights to let following cars know that you were slowing down.

Or you could express your love by flashing your brake lights five times…

It is common to flash your hazard lights at the end of a traffic jam to let following cars know that you are in a traffic jam, but if you are not in a traffic jam, pumping the brakes (pressing the brakes in small increments) and flashing the brake lights can make following cars think, “What?”

Using the brakes and hazard lights to call attention is very important in preventing accidents.

No matter how carefully you drive and pay attention to safety, it is possible to be rear-ended by a careless third party.

It’s not just your car that gets dented by being scammed.
Ensuring safety behind the car and appealing to following vehicles are important factors in protecting your vehicle, which is your property, the safety of your passengers, and yourself.

Even if the following vehicle thinks, “It’s annoying to have the brake lights turned on so many times,” it is proof that the attention has been successfully drawn to your car.

That’s where the “High Mount Stop Lamp Position + Tail Lamp Flashing Kit” comes in!
By installing the product, the tail lamp and high mount stop lamp will flash just by stepping on the brakes, without you having to think about it, and you can expect the same effect as pumping the brakes.
In addition, since the lights only flash when you first step on the brakes, they will immediately return to normal lighting when you are stopped at a traffic light, etc., and will not cause any unnecessary tailgating to following vehicles.

In addition, the product is completely plug-in and the installation location is easy to access, so even people who are not used to touching cars can install it in just 5 minutes.
Of course, it is also easy to remove.
It is simply sandwiched between the genuine connectors, so it does not damage the original wiring of the car.

■Function description■
・When you step on the brake (hold it down), the tail lamp and high mount stop lamp will flash 3 times twice, and then turn to normal lighting.

・If you take your foot off the brake while it is flashing 3 times x 2 times, the flashing will stop halfway, and if you step on the brake again, it will start flashing 3 times x 2 times again.

■Lighting pattern■
・Normal lighting after 3 flashes x 2 times (initial)
・Normal lighting after 3 flashes
・Normal lighting (flashing OFF, same as genuine)

■Switching method■
The lighting pattern will change by “turning the light switch from the AUTO position to headlights → AUTO → headlights while stepping on the brake with the engine off and about 5 seconds of pressing the brake”
Each time the switching action is repeated, the lighting pattern will change in the following order.
Flashes 3 times x 2 times, then lights up normally

↓ Flashes 3 times, then lights up normally

↓ Lights up normally

■About vehicle inspection■
For vehicle inspection, the vehicle is not compliant with the vehicle inspection in the lighting patterns 1 to 3. Please switch to pattern 4 (genuine state) when inspecting the vehicle.
Depending on the inspector’s judgment, the vehicle may not pass the inspection even in pattern 4. Please note that we do not guarantee 100% vehicle inspection compliance before purchasing.
*This product is intended for driving on private property such as events and racing tracks. Please note that it may be a violation if used on public roads.

■Product contents■
・Wiring with connector x 1
・Plastic remover (spatula)
・Cable ties x 2
*Installation and handling instructions are not included. Please refer to the images on the page for installation and switching methods, and purchase only if you are able to install it yourself.