Goonies One GB Design Two Feet Roof Rack for JIMNY JB64/JB74
¥85,000
Part number: OGB-64-0015
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer place the order.
Description
New Jimny Exclusive GB Roof Basket
A roof rack set that stylishly creates Jimny’s off-road feeling.
By equipping it, you can expect a significant increase in load capacity!
It can be installed without a base carrier, and the bolts and feet have been treated to prevent rust, and the design suppresses wind noise and resonance noise during driving, so you can ride comfortably even after installation.
The main board on the loading surface is a vertical board, and the thinner the front board, the higher the sound, so a thick horizontal board is used to suppress wind noise.
Aluminum is one-third the weight of iron. Since the body is light, the load capacity can be increased accordingly.
In addition, the rail can be removed and it can be used flat. Even if you remove the rail, it can be fixed with a round hook, so you can firmly fix a surfboard.
Load your Jimny with outdoor essentials such as camping gear, road bikes, surfboards, and more!
Maximum load capacity: 35kg
Gross Weight: 14.8kg
Material: Main body aluminum extruded material
Corner parts/PA6+GF (reinforced plastic)
Reinforcing material and foot part/iron (powder coat)
Accessories: Towing eye plate (iron) x 8 included
Coating: Cationic electrodeposition coating, black powder coat finish
Size: length 154cm, width 126cm, height 19cm (lower rack) 27cm (upper rack)
Design: Japan
Manufacturing: China
Compatible models: New Jimny JB64, New Jimny Sierra JB74
*Comes with a set of 8 round hook plates that can be conveniently mounted in any position.
*Since the foot holder is in direct contact with the vehicle, it may be scratched. Attach the enclosed protective seal to the foot.
*Installation requires the assembly of the product (assembly manual included). It takes about 30 to 45 minutes, and we recommend that you work with two people.
*Please be careful not to place objects that concentrate the weight on one point or that have an extremely high center of gravity.
You must be logged in to post a review.
You may also like…
-
Compatible with JB64,JB74
-
Compatible with JB64,JB74
-
(JB64 / 40mm up)
Reviews
There are no reviews yet.