Description

Front Spoiler [Painted] – 76,000 yen / [Unpainted]- 56,000 yen
The GR Yaris the front spoiler has an aggressive taste, with the concept of placing the highest priority on functionality as well as design. It has a more dynamic feel and a deeper atmosphere as a sports model than other models.
Three ducts are installed in the central area, and attention is also paid to the molding that gives the inflection of the outer circumference of the duct. On top of that, slit-shaped through ducts are installed under both side fog lamps, and the effect of efficiently rectifying under the floor of GR Yaris, which is a genuine and infinitely flat shape, can be expected, and above all, “combat posture”
We carefully designed the image as a GR model that has a “like” presence and is not heavy, gains more downforce, and passes lightly.

Dual Side Effector [Painted] – 62,800 yen / [Un painted] – 47,400 yen
In terms of width, the rear fenders tend to draw the driver’s attention, and GR Yaris has prepared an advanced version of the dual side effector for the front section as well, trying to create a very aggressive and combative impression. What we have prepared is an evolved version of the dual side effector. The two ducts that were “dummies” in the previous model have been upgraded to “real” specifications in this version. From the inlet Air flowing in through the inlet is further accelerated by the gentle mounting structure inside.
By narrowing the exit size from the inlet, the flow velocity is improved.
The GR Yaris has a special visual appeal when viewed from the front. Even with its small size, you can enjoy the impression of a powerful wide body The GR Yaris has a special impression when viewed from the front.

Rear Wing Effectors  [Painted] – 62,800 yen / [Unpainted] – 47,400 yen 
This is the first time for the brand to offer an additional type of rear wing with a 2PC design. This is the first time it has been set up for the GR Yaris. The design aims to center the air flowing over the roof This design aims to bring the air flowing over the roof to the center and adjust it.
The 2PC design also reduces the weight of the stock rear wing. In addition, the shape is designed to create boldness and presence. From the rear, Of course, the view from the rear, but also the exquisite presence and sporty atmosphere when viewed from the front side 7:3. and sporty atmosphere when viewed from the front side 7:3.

Rear Fender Garnish [Colors 089/219 / 3U5] – 27,600 yen / Other Colors  – 29,800 yen | [Unpainted] – 21,000 yen | Real Carbon – 49,600 yen
The protrusions on some of the rear fenders are part of the safety standard measures that are also adopted by the factory. It is called “50° rear angle”. The rear fender protrusion is called the “50 degrees rear angle” and is used for verification purposes. The idea is to make the protrusion wider and to allow a wider selection of tire sizes and wheel brands.
This rear fender garnish is designed to give you a wider selection of tire sizes and wheel brands. It is relatively easy to install with the included tapping and special double-sided tape. 089, 3U5, and 219 are available pre-painted. The width is 8mm wider on each side when measured from the top of the stock protrusion, for a total 16mm advantage on both sides. This gives you a total of 16mm advantage.