Name: JAOS BATTLEZ lift up set VFA ver.A for Hilux 125
Availability: InStock

JAOS BATTLEZ lift up set VFA ver.A for Hilux 125

Product number: A732096A

Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered
with this shipping, we may request an additional shipping charge after the buyer places the order.
4.5% deduction when paying via Bank/WISE Payment

Description

It is a set of lift-up springs that raises the front vehicle height and a damping force adjustable damper. The BATTLEZ damper with adjustable damping force realizes comfortable driving, while the lift-up spring that makes use of the characteristics of titanium compound material, which is “soft but stiff”, corrects the forward sagging posture. Of course, the spring is a Ti-W with a permanent set guarantee. No structural changes are required.

Product content	Front: lift-up spring, damper Rear: damper
Vehicle height	Lift up Front 35-40mm (2017-2020/08) Front 30-35mm (2020/08-)

spring

Wire diameter	Front 17Φ
spring rate	120N/mm
Color	Silver

shock absorber

type	Front: Low-pressure gas twin-tube damper Rear: Low-pressure gas twin-tube damper, Harmoflex mechanism
Damping force adjustment	14 steps dial adjustment type
damping force	Front: Extension side -43~33%, compression side -18~14% (0.3m/sec/genuine ratio) Rear: extension side -9~21%, compression side -50~-35% (0.3m/sec/genuine ratio) )
stroke	Front +16mm, Rear +33mm
body diameter	Front 45φ, Rear 54φ
piston diameter	Front 25φ, Rear 30φ
Color	gray metallic

Mounting information

Mounting method	genuine replacement
installation time	2.5 hours

Precautions/Supplementary Explanation

Safety
equipment such as driving support systems and collision avoidance systems of each automobile manufacturer may cause erroneous recognition and malfunction of radars, cameras, sensors, etc. due to changes in vehicle height. Please note that we are not responsible for any malfunctions of these systems due to changes in vehicle height due to the installation of our lift-up (or low-down) suspension, or accidents caused by such malfunctions.

Due to the lift-up, there is a possibility that the front side visibility standard (Section 44, Paragraph 5 of the safety standards) may not be met, and it may be necessary to add a front view camera or other forward visibility confirmation mechanism.
> Front view camera (reference): Our demo car uses the data system MVC811 multi-view camera, which

can be installed after 20.08 M/C

packing size
H:525 × W:400 × D:210mm
H:225 × W:230 × D:770mm

Product weight (the weight of the product itself, excluding the package): 19.75 kg
Packing weight (packing weight): 22.4 kg