Description

Front bumper Spoiler – 106,800 yen
Material： FRP
Color: Unpainted
3-split structure
* LED slim daytime lamp sold separately
* Accessory hook sold separately

LED slim daytime lamp <Included with front bumper>
2 pieces 1 set
Ken style Jimny front bumper exclusive product

Accessory hook – 10,500 yen
Material： polyurethane resin
Color: Unpainted
2 pieces 1 set
Ken style Jimny front bumper exclusive product

Front grill with LED – 68,800 yen
Material： FRP
Color: Unpainted
Front grill LED (28Φ) included
● Can also be installed on Suzuki Jimny model JB64W

Rear roof spoiler -56,900 yen
Material： FRP
Color: Unpainted
Can also be installed on Suzuki Jimny model JB64W

Rear gate carrier – 58,400 yen
Material： steel
Color: Baking grain painted

Size Width: Approx. 640 mm / Height: Approx. 380 mm / Thickness: Approx. 120 mm (when closed) / Approx. 235 mm (when opened) 　Load
capacity Approx
. * Scoop is not included 　Anti-theft wire hook 　Padlock 　Eyebolt & nut 　Bolt for fixing the main body Compatible scoop grip diameter 38 mm * This product is based on a standard specification vehicle. A combination of external bumpers and non-genuine specifications is considered. No ● Can also be installed on Suzuki Jimny Sierra model JB74W [Rust prevention maintenance video is now available]

Scoop – 9,400 yen
Material： stainless steel

can be installed on the KEN STYLE rear gate carrier
Size Overall length: 820mm Grip width: 115mm
Scoop width: 170mm Scoop length: 230mm
Weight approx. 1.0kg
With KEN STYLE sticker (pasted)
* Specifications may change slightly depending on the timing of the purchase

Multi-accessory accent bis [Type 1] 5,300 / [Type 2] – 2,980 yen
Material： FRP
Color: Unpainted
Can also be installed on Suzuki Jimny model JB64W

Aero LED light
Type 1 LED size: 28mm Base: Polyurethane 1 piece 10,478 JPY
Type 1 LED size: 28mm Base: Polyurethane 2 pieces 1 set   141,900- JPY
Type 2 LED size: 19mm Base: Polyurethane 1 piece  10,038 JPY
Type 2 LED Size: 19mm Base: Polyurethane 2 pieces 1 set  14,350 JPY

LED lighting color white
・ Power supply 12V
・ Component
body
wiring with fuse
Wiring
electro tap

・ Main body base can be attached only with the attached double-sided tape.
・LED light wiring processing is required separately.

・Since this product is developed for automobiles, please use it at your own discretion except for painted parts and resin parts.
・Since this product is attached with double-sided tape, please strictly observe the following precautions.
・Be sure to clean and degrease the part where the double-sided tape is attached, and degrees more carefully when attaching to the resin part.
・In case of low temperature and high humidity, use an industrial dryer to raise the temperature of parts and mounting parts. (Approximately 15 ° C or more and 30 ° C or less)
・Use tweezers, etc. to avoid touching the adhesive surface.
・Never reattach the double-sided tape as it will reduce the adhesive strength.
・Do not get wet for 24 hours after work.
* Please note that we are not responsible for any problems caused by work/processing.

Door switch panel & keyhole cover 5 pieces – 11,490 yen
Door switch panel & keyhole cover 5 pieces/set – Breakdown Door switch panel: 3 pieces / Keyhole cover: 2 pieces

Side plating molding (JB64W / JB74W) –  30,900 yen
10 pieces (right: 6 pieces/left: 4 pieces)

Side blinker garnish –  10,900 yen
・Material: Polyurethane resin
・Size: Thickness: 11mm, Width: 96mm, Height: 63mm
・Color: Matte black paint 　finish

window washer nozzle cover (JB64W / JB74W) –  13,900 yen
Left and right total 2 pieces