MASTERPIECE 2 Inch Up SUSPENSION KIT for JIMNY
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered
with this shipping, we may request an additional shipping charge after the buyer place the order.
4.5% deduction when paying via Bank/WISE Payment
Jimny JB64W Sierra JB74W Extreme 2inch Up Complete Kit TYPE2
Jimny JB64W JB74W can be lifted about 2 inches
Extreme suspension full kit.
Due to the difference in grade and equipment weight, it is more than 2 inches
It may be slightly less lift-up.
A coil spring that is a little stiffer than the genuine one and a slightly stiffer
It’s a combination of shocks.
Even with lift-up specifications, on-road and dirt
It is set for those who want to run sharply.
coil springs, Monroe samurai shocks,
Stainless mesh brake hose for 4 wheels
(The rubber brake hose in the kit photo is not included.)
stainless steel adjustable lateral rod,
Rear shock mounting bolt & spacer set,
Caster dream (caster angle correction bush),
A set of auto-leveler adjustment brackets.
Under the front propeller shaft due to lifting up
Since the cross-member interferes,
It is necessary to remove it or add a compatible product (GS-S207).
Features of coil springs
On the rear side, so that it can handle the weight difference between the left and right
The left and right coils are designed with different lengths.
Ignore the cost, especially on the rear side where the drive torque tends to concentrate
Change the spring rate on the left and right,
Feel during cornering with the accelerator on
It has been tuned with particular attention to the difference in roll feeling between the left and right.
It is possible to run with a natural roll feeling when running without a stabilizer.
It is designed with an emphasis on front-rear balance.
Front spring rate 2.3kg/mm
The average rear spring rate is 2.2kg/mm.