Description

Front Half Spoiler(ABS) – 117,800 yen
Unpainted – 84,800 yen
Painted in 2 colors – 131,800 yen
LEDdaylight white (circle x 4) is included. It will be installed by cutting the normal bumper.

Front Half Spoiler(ABS) – 134,300 yen
Unpainted – 101,300 yen
Painted in 2 colors – 147,500 yen
Material: ABS

Plated garnish specifications
LEDdaylight white (circle x 4) is included
* It will be installed by cutting the normal bumper.

Side Step (ABS) – 203,600 yen
Unpainted – 139,800 yen
Painted in 2 colors – 216,800 yen
Material: ABS

Rear Under Spoiler(ABS) – 120,000 yen
Unpainted – 84,800 yen
Painted in 2 colors – 142,800 yen
Material: ABS

Front Grille Type A(ABS) – 73,800
Unpainted – 51,800 yen
* If necessary, calibrate each sensor at the dealer.

Front Grille Type A(AES) – 51,800
Unpainted – 51,800 yen
Matte black specification with grain processing (no painting required)
* If necessary, calibrate each sensor at the dealer.

Front Grille Type B(ABS) – 73,800
Unpainted – 51,800 yen
* If necessary, calibrate each sensor at the dealer.

Front Grille Type B(AES) – 51,800
Carbon pattern black specifications
* If necessary, calibrate each sensor at the dealer.

Daylight KIT (turn signal interlocking TYPE) – 117,800
Unpainted – 95,800 yen
Line LED is attached (blinker interlocking TYPE)
* It is necessary to make a hole in the bumper.
3D printer output Resin powder sintered product

Rear Gate Spoiler(ABS）- 74,900 yen
Unpainted – 52,900 yen
Material: Resin(ABS)

Rear Gate Spoiler(AES）- 52,900 yen
Matte black specification with grain processing (no painting required)
Material: Resin(ABS)

Rear Gate Spoiler(AES）- 52,900 yen

Carbon pattern black specification (no painting required)

Material: Resin(AES)

Door Mirror Cover – 51,800 yen
Unpainted – 29,800 yen
Material: Resin(ABS/AES) / 3D printer output Resin powder sintered product

LED Back Fog Lamp（G）Kit – 37,500 yen
(If the height of the lower edge of the back fog during lowdown is 250 mm or less, a vehicle inspection will not be supported.)
Excluding cars with genuine rear fog lights

Stainless Pillar Reflector – 37,500 yen
* For vehicles equipped with a visor, it is necessary to attach/detach the visor before installing this product.
(Please prepare double-sided tape for attaching the visor separately)

Pillar panel(AES) – 15,780 yen
Carbon pattern black specifications
* For vehicles equipped with a visor, it is necessary to attach/detach the visor before installing this product.
(Please prepare double-sided tape for attaching the visor separately)

JULIA BALIAN  [BLACK/POLISH]

SIZE	INSET	HOLE	P.C.D.	HUB (high mm)	Rim depth (mm)	BLACK/POLISH
19 x 7.5	50	Five	114.3	41	46	70,500yen
20 x 8.5	35	Five	114.3	51	57 57	80,400yen
20 x 8.5	45	Five	114.3	41	57 57	80,400yen
21 x 8.5	35	Five	114.3	39	63	87,000yen
22 x 9.0	38	Five	114.3	39	71	104,600yen

Exhaust System 4 left and right 1200T/4WD or 1800/HV 1200T/2WD – 150,800 yen
1800/HV 1200T/2WD Taitanium color- 159,600 yen
Proximity noise : right 82db / left 81db

Exhaust System 4 left and right 1200T/4WD or 1800/HV 1200T/2WD – 150,800 yen
1800/HV 1200T/2WD Taitanium color- 159,600 yen
Proximity noise : right 82db / left 81db

Exhaust system options are Stainless Steel or Titanium Color
See the prices above this

ADJUSTABLE SUSPENSION V-spec. – 181,600 yen

ADJUSTABLE SUSPENSION Details

Model	Displacement	Drive system	Spring rate	Front (mm)	Rear (mm)	Damping force (F)	Damping force (R)	Adjustment method
MXUA80	2.0L	2WD	F6 / R7	-65-0	-50 to -20	40-step adjustment	40-step adjustment	Full-length type

 

CALIPER COVER Front / rear set – 67,200 yen
Material: Made of FRP

Please check the clearance in the wheel of the installed vehicle before purchasing. (Recommended clearance: 15 to 20 mm) If the clearance
between the genuine caliper and the inside of the wheel is not secured, it may not be possible to install the spacer or the installation itself.

 

* The above figures may vary depending on the vehicle.

Painted * Color No.
089: Platinum White Pearl
070: White Pearl Crystal Shine
209: Black mica