NEXUS LED Winker Tail Lamp for Toyota Harrier
Product Code: TAILT057
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer place the order.
4.5% deduction when paying via Bank/WISE Payment
|Harrier 80 series LED tail lamp custom turn signal relocation parts to dress up|
|TOYOTA Harrier 80 series (gasoline car)
MXUA85 Year: R2.6 ~TOYOTA Harrier 80 series (hybrid car)
AXUH80 Year: R2.6
~ Gasoline & hybrid compatible
* Please be sure to check the shape before ordering as it may not be possible to install due to options etc.
|Description of item|
It is now possible to switch ON / OFF of the opening act as well as ON / OFF of the winker operation!
It is possible to switch between blinking lighting and sequential lighting.・ The fiber LED tail lamp featured in the July issue of STYLE WAGON has
finally appeared !!!・ The opening action is installed to appeal to the rear car
. ※※ The opening action function is linked to the small size. It does not work when the auto light is not lit, such as during the day.-The turn signal part, which was unpopular for poor visibility, has been moved to the tail part !!
The sequential turn signal is adopted!-Can be attached with a coupler-on design (only the turn signal wiring needs to be interrupted to the bumper side.)
* Rear bumper attachment/detachment Is not required.
■ How to switch OP action sequential turn signal ON / OFF
■ How to turn the opening action function ON / OFF
While stepping on the brake, switch the small lamp ON / OFF 3 times, wait for 5 seconds, and then release the brake.How to turn on / off the sequential turn signal function While
stepping on the brake, switch the small lamp ON / OFF 5 times, wait for 5 seconds, and then release the brake.Reset method
While stepping on the brake, switch the small lamp ON / OFF 7 times, wait for 5 seconds, and then release the brake.
* When switching ON / OFF at night, perform the switching work with the engine turned off.
* The opening action function is linked to small. It does not work when the auto light is not lit, such as during the day.[Set contents]
A fiber LED tail lamp kit set
* Installation video is available on YouTube
* Please prepare the 10mm socket wrench and lining peeling required for tail attachment/detachment separately.
* As with the genuine tail, the bolt holder is made of plastic, so it may rotate when tightened strongly with a tool. Please do not tighten it strongly when installing.
* Coupler that turns off the genuine turn signal is sold separately.
Please note that the genuine turn signal will be turned on at the same time with this kit alone.
* We have not confirmed the vehicle inspection.
We have received reports that if it is installed at the same time as a genuine turn signal canceller, it may pass the vehicle inspection.
If you are concerned, please check with the nearest vehicle inspection site, dealer, maintenance shop, etc.
* Please be sure to perform caulking.
When used in an environment where the surface temperature drops, such as when washing a car or during sudden changes in the weather, cloudiness (adhesion of water droplets) may occur inside the lens. We do not accept returns, refunds, or exchanges for the above reasons. Thank you for your understanding in advance.
* We cannot guarantee compatibility with external parts. Thank you for your understanding.