Description

Front Bumper [Matte Black] – 98,000 yen [Unpainted] – 76,000 yen
The photo is “Front bumper B” compatible with washer nozzles

High quality made of ABS .. Achieves excellent fitting properties! (There is no bumper glare after installation) It can be installed without removing the genuine radiator partition plate. This will not reduce the cooling of the engine.
The bottom of the genuine bumper can be fixed with genuine bolts, but the bottom of the bumper is raised toward the front from the bottom. In addition, the design is cut compared to the genuine bumper so that the tires can be seen from the front. (Cut the tire house and install it)

5-LED (daylight) kit – 34,20000 yen

5-LED (daylight) kit – 34,20000 yen

***** Wiring method *****
Red wiring = constant power supply (battery + power supply)
Black wiring = ground (connected to the body)
Blue wiring = ACC (power supply that 12V flows when the key is turned on)
White wiring = Illumination (power supply that 12V flows when the position lamp is turned on)
If you connect the white wiring to the Illuminator power supply, the light will be dimmed when the position is ON.

With this connection method, it will be daylighted during the day and dimmed at night.
With an afterglow function that turns on the illumination for about 12 seconds even when the key is turned off and then turns off.

***** Mounting method *****

It is a type that makes a hole with the attached hole saw and tightens it with the fixing screw of the LED body to fix it.

Side Step [Matte Black / Silver Tourton] – 65,000 yen [Unpainted] – 49,600 yen

Made of ABS, high quality. Achieves excellent fitting properties! (There is no glare after mounting) It is easy and easy to install because it is simply covered from the genuine side step and installed.
* The genuine pin on the bottom is also used, so it can be installed securely.