Description

Front Bumper*LED lamp Φ25 [unpainted] – 230,000 yen
Material: FRP
●Silver-colored net included (our vehicles are fitted with a net painted black)
●Uses 10 x Φ25 LED spot lamps.
●LED spot lamps require wiring to the ACC or small lights.
●Choose from LED spot colors (white or blue).
●When installing, secure with the included mounting screws, genuine bolts, and clips.

Side Panel Ver 2.0 [Unpainted]  – 75,000 yen 
Material: FRP
*Only for VELLFIRE (Z/ZR), ALPHARD (S/SR).
●Uses double-sided tape (thickness 1.2mm, width 10mm, length 3500mm).
●Uses rubber molding (3000mm).
●When installing, secure with the included double-sided tape and mounting screws.

Rear Bumper [Unpainted]  – 195,000 yen
Material: FRP
●This work requires the removal of the third-row seats and interior trim.
●The product does not have pre-drilled holes for sensor installation.
●Drilling is required to transplant the sensor.
● Replace the original bumper.
●When installing, secure with the included bolts, original bolts, and clips.
For details, please refer to the instruction manual.
*The vehicle in the image is for illustration purposes only and has been painted in different colors.
*Rear fog lights are sold separately.
●Optional items
•Rear fog lights – 8,500 yen
•Rear fog relay kit included – 56,200 yen

Front Grill Face.1 [Unpainted]  – 85,000 yen
Material: FRP
* Compatible with vehicles equipped with the Pre-Crash Safety System and Intelligent Clearance Sonar.
●When ordering, please confirm whether your vehicle has an Around-View Monitor Camera and Clearance Sonar.
Please order using the following part numbers.
■With camera/with sonar 1T018C00-00 (paint #)
■With camera/without sonar 1T018C00-01 (paint #)
■Without camera/with sonar 1T018C00-10 (paint #)
■Without camera/without sonar 1T018C00-11 (paint #)
●Silver color net included (our vehicles come with a net painted black)
●Remove the Netz emblem (compatible with millimeter wave radar) and attach it to our product (Front Grille Face I).
●Use plated molding (length 4500mm)
●Use double-sided tape (thickness 1.2mm, width 10mm, length 1200mm).
●When installing, secure with the included double-sided tape and mounting screws.

Front Grill Face. 2 [Unpainted]  – 85,000 yen
Material: FRP
1. Except for vehicles with a Pre-Crash Safety System and Intelligent Clearance Sonar.
2. During the production stage, reinforcement was unnecessary, so we changed the design and removed the vertical lines. The images in the gallery are pre-release images (installed on the master model).
●Silver colored net included (our vehicles have a black painted net installed)
●Plated molding (length 5000mm) used
●Double-sided tape (thickness 1.2mm, width 10mm, length 1000mm) used.
●When installing, secure with the included double-sided tape and mounting screws.
*The vehicle in the image is painted in different colors for illustrative purposes only.

Front Hood Extension [Unpainted]  – 35,000 yen
Material: FRP
●Silver net included (our vehicles come with a net painted black)
●Uses double-sided tape (thickness 1.2mm, width 10mm, length 3500mm).
●Uses rubber molding (3000mm).
●Requires cutting of bumper.
●Requires cutting of bumper if installing rear fog lights.
●When installing, secure with the included double-sided tape and mounting screws.

Headlight Garnish [Unpainted]  – 65,000 yen
Material: FRP
*Suitable for all grades of VELLFIRE.
●Uses 4 LED spot lamps Φ15.
●LED spot lamps require wiring to ACC or small lights.
●Choose from LED spot colors (white or blue).
●When installing, secure with the included double-sided tape and mounting screws.
For details, see the instruction manual.
●Uses double-sided tape (thickness 1.2mm, width 10mm, length 100mm).
●When installing, secure it with the double-sided tape included.

Racing Bonnet  [Unpainted]  – 125,000 yen 
Material: FRP
●Silver net included (our vehicles come with a black painted net)
●Uses genuine hood top molding
●When installing, secure with the included bolts, nuts, and genuine bolts.

Side under extension [Unpainted]  – 95,000 yen 
Material: FRP
※4PCS *Cannot be installed at the same time as side panels*Check specifications
※For Z-Grade and ALPHARD S-Grade only.
※1T018J00 Cannot be installed at the same time as side panels.
●Silver color net included (our vehicles have a black painted net installed)
●Use double-sided tape (thickness 1.2mm, width 10mm, length 300mm).
●When installing, secure with the included double-sided tape and mounting screws.
For details, please see the instruction manual.
※The vehicle in the image is for illustration purposes only and has been painted in different colors.

Side panel [Unpainted]  – 135,000 yen
Material: ABS
*Cannot be installed simultaneously with side under extension
For S-grade only
*It cannot be installed simultaneously with the 1T018J01 side under extension.
*The following genuine parts are required When installing on the late Executive Lounge/special edition S” TYPE GOLD” (after May 2020).
・76901-58050-※1 Fender panel mudguard RH
・76902-58050-※1 Fender panel mudguard LH
・76903-58060-※1 Front door mudguard RH
・76904-58060-※1 Front door mudguard LH
・76905-58060-※1 Sliding door mudguard RH
・76906-58060-※1 Sliding door mudguard LH
*1 The following codes are added for each color.
White Pearl Crystal Shine: A0
Black: C0
Sparkling Black Pearl Crystal Shine: C1
Burning Black Crystal Shine Glass Flake: C2
●Uses rubber molding (5000mm).
●When installing, secure with the included double-sided tape and mounting screws, bolts and nuts.

Backdoor Extension [Unpainted]  – 55,000 yen
Material: FRP
*We recommend using it in conjunction with the rear bumper.
●Silver net included (our vehicles come with a black painted net)
●Uses double-sided tape (thickness 0.8mm, width 10mm, length 3200mm).
●Uses cutting sheet (420×100).

Rear Corner Panel [Unpainted]  – 60,000 yen 
Material: FRP
*Suitable for all grades of VELLFIRE and ALPHARD.
*Early model (2015.1-2017.12): Cannot be installed on vehicles with the manufacturer’s T-connect option.
*Late model (2018.1~): Cannot be installed on vehicles with blind-spot monitors.
Late model (2019.1~): Cannot be installed.
●Silver-colored net included (our vehicles come with a net painted black)
●Uses double-sided tape (thickness 1.2mm, width 10mm, length 2000mm).

Rear Wing [Unpainted]  – 100,000 yen 
Material: FRP
●Suitable for all grades of VELLFIRE and ALPHARD.
●Uses double-sided tape (thickness 1.2mm, width 10mm, length 3500mm).
●Uses double-sided tape (thickness 3.0mm, width 10mm, length 200mm).
●When installing, secure it with the double-sided tape and mounting bolts included.
*The vehicle in the image is for illustration purposes and has been painted in different colors.

Rear Wing Ver.2 with illumination [Unpainted]  – 145,000 yen 
Material: FRP + ABS
●Cyan lights come on when ACC or small lights are activated, and red lights come on when braking.
●Wingtip plate and center bar set.
●Wiring for ACC or small lights/brakes is required.
●Use double-sided tape (thickness 1.2mm, width 10mm, length 3500mm).
●When installing, secure with the included double-sided tape and bolts.
*The vehicle in the image is for illustration purposes only and has been painted in different colors.

Rear Wing Version Up Kit [Unpainted]  – 110,000 yen 
Material: FRP
*This kit will upgrade our rear wing (1T018W00) to include illumination.
●Cyan lights up when ACC or small lights are on, and red lights up when braking.
●This product is the center bar only. Please reuse the wing end plates.
●Wiring to ACC or small lights/brake is required
●Use double-sided tape (thickness 1.2mm, width 10mm, length 3500mm).
●When installing, secure with the included double-sided tape and bolts.
*The vehicle in the image is for illustration purposes only and has been painted in different colors.

ROWEN titanium nut – 56,800 yen
M12 x P1.5