Toyota Genuine TRD Door Stabilizer
¥21,840
Product No: MS304-0001 (Front 2 Pieces)
If you need the rear as well, check the compatibility list and order 2 sets
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
Description
By inserting a spacer in the gap of the striker part of the door and filling the gap, the response delay of the vehicle when the steering is operated is reduced and the response is quick.
Since the catch side has a sliding mechanism, the gap is automatically adjusted to zero.
It can be installed without processing on the vehicle side and has a design with a strong presence.
[WARNING]
If you install it on a vehicle other than the compatible model, the door will not be able to close completely, causing damage or failure of the vehicle due to short closing of the door while driving, and in the worst case, a serious accident such as opening the door while driving. may invite
[Caution]
Regarding modifications to doors that imitate this product
This product is a product that has been fully verified for safety (ensuring the opening and closing function of the door) when installed for compatible models.
Modifying the car body to imitate this product or processing the parts of the door part may lead to malfunction of the door opening and closing mechanism, which may lead to damage or malfunction of the vehicle, or in the worst case, a severe accident such as opening the door while driving. Please do not do so.
*The general-purpose type (MS304-00001) can be used for Toyota 86 (ZN6) from January 2011 shipment.
Compatible car model list
★Note: This product cannot be installed on the G’s series and the GRMN/GR series.
| car name | model | Front | Rear | remarks |
|---|---|---|---|---|
| door | door | |||
| iQ | NGJ10, KGJ10 | ○ | – | |
| aqua | NHP10 | ○ | ○ | |
| Altezza | SXE10, GXE10 | ○ | ○ | |
| Alphard (30 series) | GGH3#W, AGH3#W, AYH30W | ○ | * | It must be installed together with the dedicated brace set (MS300-58003). |
| WISH | ZGE25W | ○ | ○ | |
| Vitz (130 series) | KSP130, NCP131, NSP13# | ○ | ○ | |
| Vitz (90 series) | SCP90, NCP91/95, KSP90 | ○ | ○ | |
| Vitz (10 series) | SCP10,NCP1# | ○ | ○ | |
| Vellfire (30 series) | GGH3#W, AGH3#W, AYH30W | ○ | * | It must be installed together with the dedicated brace set (MS300-58003). |
| Verossa | JZX110,GX110 | ○ | ○ | |
| Voxy (80 series) | ZRR8## | ○ | * | It must be installed together with the dedicated brace set (MS300-28002). |
| Voxy (80 series) | ZWR80# | ○ | * | It must be installed together with the dedicated brace set (MS300-28003). |
| Esquire (80 series) | ZRR8#G | ○ | * | It must be installed together with the dedicated brace set (MS300-28002). |
| Esquire (80 series) | ZWR80G | ○ | * | It must be installed together with the dedicated brace set (MS300-28003). |
| MR2 (20 series) | SW20 | ○ | – | |
| FJ Cruiser | GSJ15W | ○ | – | For a double door, the required number is 1 set for 1 vehicle. |
| Auris (180 series) | ZRE186H, NZE181H | ○ | ○ | |
| Corolla Axio (160 series) | NKE165, NRE161, NZE161, NRE160, NZE164 | ○ | ○ | |
| Corolla Fielder (160 series) | NKE165G, ZRE162G, NRE161G, NZE161G, NZE164G | ○ | ○ | |
| Corolla Levin (80 series) | AE86 | ○ | – | Since the shape of the mounting bolt is different, the Toyota genuine bolt |
| (Part number: 90148-80027) Four are required separately. | ||||
| Crown (220 series/20 series) | GWS224, AZSH20, AZSH21, ARS220 | ○ | ○ | |
| Crown Athlete/Royal (210 series) | GRS21#, AWS21#,ARS210 | ○ | ○ | |
| Crown Athlete/Royal (200 series) | GRS20# | ○ | ○ | |
| Crown Majesta | GWS214 | ○ | ○ | |
| SAI | AZK10 | ○ | ○ | |
| C-HR (10 series/50 series) | ZYX1#, NGX10, NGX50 | ○ | ○ | |
| Sprinter Trueno (80 series) | AE86 | ○ | – | Since the shape of the mounting bolt is different, the Toyota genuine bolt |
| (Part number: 90148-80027) Four are required separately. | ||||
| Celica (230 series) | ZZT23# | ○ | – | |
| Noah (80 series) | ZRR8## | ○ | * | It must be installed together with the dedicated brace set (MS300-28002). |
| Noah (80 series) | ZWR80# | ○ | * | It must be installed together with the dedicated brace set (MS300-28003). |
| Toyota 86 | ZN6 | ○ | – | Bolts for Toyota 86 are included from January 2011 shipment. ~December 2010 shipments cannot be installed because bolts are not included. (Separate bolts are required) |
| Harrier (60 series) | ZSU6#W, AVU65W, ASU6#W | ○ | ○ | |
| Harrier (30 series) | ACU30W, ACU35W | ○ | ○ | |
| Prius/Prius PHV (30 series) | ZVW30, ZVW35 | ○ | ○ | |
| Prius α | ZVW4# | ○ | ○ | |
| Mark X (130 series) | GRX13# | ○ | ○ | |
| Mark II (110 series) | JZX110,GX110 | ○ | ○ | |
| RAV4 | ACA36W, ACA31W | ○ | ○ |
supplies
| Product name | Applicable model | Component | part number | Price | |
| Door-side spacer supplies | General-purpose type (MS304-00001) equipped vehicle | Door side spacer, mounting bracket (for one door) | 69402-SP000 | 3,750 |
You must be logged in to post a review.
Related products
-
Cusco LSD for Toyota GR Yaris
¥227,760Toyota GR Yaris (GXPA16 / 1.6L turbo / 4WD / 6MT) -
TOM’S Accelerator Pedal
¥8,320TOM'S Accelerator Pedal for Toyota 86 -
DTM Sports OVAL117W
-
RS (1.5L・FF) Model MXPA12
-
HKS SUPERIOR SPEC-R Muffler
¥523,611Nissan GT-R R35 VR38DETT 07 / 12-19 / 05 (31025-AN005) -
OVAL117W
You may also like…
-
CARBING Titanium Strut Tower Bar
-
For GR 86/Yaris Cross /C-HR GR Sport/ Vitz GR etc.,
-
CUSCO Genuine Parts
Reviews
There are no reviews yet.