TRD Aero Ver.1 Kit for Toyota Harrier
Original price was: ¥291,200.¥280,800Current price is: ¥280,800.
TRD Aero Body Kit for Toyota Harrier. Genuine color painted includes Front Spoiler + Side Skirts + Rear Bumper Spoiler
You can also purchase individual parts. See the prices below.
Description
Front spoiler Ver.1 (with LED) – 126,600 yen
Material: Resin (ABS)
Emission color: White
Ground height: Approximately 35mm down from the original Overall
length: Approximately 15mm plus from the original
* There is no ON / OFF switch (always lit when the ignition is ON).
* The color and illuminance of the photo may differ from the actual one.
* Only available with LED.
Side Skirt [ Painted] – 62,800 yen
Material: Resin (PPE)
Ground clearance: Approximately 10mm down from the original
Rear Bumper Spoiler – 80,400 yen
Material: Resin (PPE)
Ground height: Approximately 35mm down from the original Overall
length: Approximately 15mm plus from the original
* Vehicles with cold climate specifications [manufacturer option] must be installed at the same time as the rear fog lamp garnish (505).
* If the body color is White Pearl Crystal Shine <070>, the blackout part will be painted black, otherwise it will be painted silver.
Rear fog lamp garnish – 15,000 yen
Color: Black, Silver
* The image shows the rear bumper spoiler 504 (white pearl crystal shine <070>) with the rear fog lamp garnish (black) attached.
* Simultaneous installation with the rear bumper spoiler (504) is required.
* The product does not include the rear fog lamp.
Front bumper garnish- 45,200 yen
Color: Black, Silver
Material: Resin (ABS)
Overall length: Approximately 5mm plus from the original
quarter panel spoiler – 32,000 yen
By installing it on the rear side of the vehicle, the air flowing on the side is adjusted and the steering stability is improved.
Material: Resin (PPE)
High response muffler Ver.S – 84,800 yen
Material: Stainless steel
Push Switch – 20,400 yen
17inch Aluminum Wheel “weds RIZLEY ZM” & Nut Set – 82,000 yen
Size: 17 x 7.0J Inset : 40
* A special wheel nut is included when ordering one unit.
* Use the tires that are standard equipment.
 lug nut set – 32,000 yen
Wheel nut with TRD logo. The spline processing unique to MacGuard Inc. of the United States is applied, and since it can be attached and detached with a dedicated adapter, it also has a simple security function.
Tire pressure / temperature digital gauge – 40,800 yen
By bringing the smart key type receiver closer to the tire air valve, you can easily measure the air pressure and temperature.
A set of 1 measuring instrument and 4 TPMS valves.
MCB® (Motion Control Beam) – 59,500 yen
Installing it inside the rear bumper absorbs and damps slight vibrations and slight deformations that occur during driving and increases body rigidity and improves responsiveness.
* MCB® is a registered trademark of Aisin Seiki Co., Ltd.
18-inch aluminum wheels “TRD TF6” with standard wheel nut – 182,150 yen
18-inch aluminum wheels “TRD TF6” Simple security function with wheel nut – 199,200 yen
Fuel cap garnish – 2,100 yen
You must be logged in to post a review.
Reviews
There are no reviews yet.