Description

Front spoiler – 62,800 yen
Material: Resin (PPE)
Ground clearance: Approximately 64mm down from the original

Following original factory painted colors are available. unpainted parts also can be purchased
White Nova Glass Flake (083) A1
Black (212) C0
Graphite black glass flakes (223) C3

Here is the instruction Manual

Side Skirt – 65,000 yen
By rectifying the wind flowing on the side of the body, straight-line stability is improved.
* A higher effect can be achieved by installing the front spoiler, quarter panel spoiler sports muffler, and rear diffuser at the same time.
Material: Resin (PPE)
Ground clearance: Approximately 10mm down from the original

Following original factory painted colors are available. unpainted parts also can be purchased
White Nova Glass Flake (083) A1
Black (212) C0
Graphite black glass flakes (223) C3

Here is the instruction Manual

Sports muffler & rear diffuser – 177,500 yen
Sports muffler – 135,400 yen
Rear diffuser – 51,800 yen

The rear diffuser, which provides stable downforce and straight-line stability, is tuned for back pressure exclusively for HV vehicles to obtain rich torque characteristics while maintaining fuel efficiency.
* Sports muffler and diffuser are installed as a set
* A higher effect can be achieved by installing the front spoiler, side skirt, and quarter panel spoiler at the same time.

Material: Sports muffler / Stainless steel
Rear diffuser / resin (PPE)

Size (sports muffler): Tail end / φ70mm

Following original factory painted colors are available. unpainted parts also can be purchased
White Nova Glass Flake (083) A1
Black (212) C0
Graphite black glass flakes (223) C3

Here is the instruction Manual

Quarter panel spoiler – 98,000 yen
It rectifies the wind flowing on the side of the body, reduces the rear lift, and contributes to running stability.
* A higher effect can be achieved by installing the front spoiler, side skirt, sports muffler, and rear diffuser at the same time.

Material: Resin (PPE)

Here is the instruction Manual

Front Aero Spats – 92,500 yen
It is attached to the underside of the engine cover to enhance the rectification effect of the body and improve steering stability.
Material: Synthetic rubber (EPDM)
Ground clearance: Approximately 25mm down from the original

Here is the instruction Manual

Member brace set  – 120,000 yen
By reinforcing the entire body floor from front to back in a well-balanced manner, Suspension more effectively receives input from the road surface
It contributes to supple ride quality and stable road-holding performance.

Material: Steel
Ground clearance: Approximately 29mm down from the original
* By installing it together with the forged aluminum wheel, it will be more effective.

Here is the instruction Manual

21 inch forged aluminum wheel & security locknut set – 397,200 yen

Lightweight and highly rigid forged aluminum wheels have been specially developed while paying particular attention to the shaping of the spokes.
By reducing the unsprung weight and improving the rigidity, it contributes to supple ride quality and stable road-holding performance.
* It will be more effective if it is installed at the same time as the member brace.

Size 18-7.5J 5H-100 inset 45mm
Material: Forged aluminum (1 piece)
Color: Gun metallic (matte finish)
Weight: 9.9kg

* A separate genuine wheel center cap (recommended: for “F SPORT”) is required for installation. The standard wheel center cap (for “F SPORT”) can be used.
* Tires are not included in this product. Separate tires (* recommended tire size 225 / 40R18) are required.

Here is the instruction Manual