Description

Front spoiler (left and right split type) – 65,700 yen / BLACK EDITION – 65,700 yen

Located at both ends of the front, it provides proper downforce and sporting performance. The design does not destroy the original sharpness of the vehicle, giving the standard version L bumper a distinctive personality and the F SPORT bumper even more presence.

Material: Resin (PPE)
Ground clearance: Approximately 40mm down from the original

Side skirt (piece type left and right) – 94,700 yen / BLACK EDITION – 94,700 yen
Rectifies the wind flowing on the side of the body to improve straight-line stability.
* A higher effect can be achieved by installing the front spoiler, rear spoiler, sports muffler, and rear diffuser at the same time.
Material: Resin (PPE)
Ground clearance: Approximately 9mm down from the original

Rear spoiler – 57,300 yen / BLACK EDITION – 57,300 yen
Reduces rear lift by rectifying the wind flowing on the upper surface of the trunk. Contributes to stable driving performance.
* A higher effect can be achieved by installing the front spoiler, side skirt, sports muffler, and rear diffuser at the same time.
Material: Resin (PPE)

Sports muffler & rear diffuser – 281,700 yen / Rear Diffuser – 105,700 yen / BLACK EDITION – 105,700 yen
A muffler that has been tuned to the tone of the rear diffuser provides stable downforce and straight-line stability. The luxurious yet sporty design creates a powerful rearview.
* Sports muffler and rear diffuser are installed at the same time.
* Aero spats are installed as a set under the front engine undercover to adjust the aerodynamic balance.
* A higher effect can be achieved by installing the front spoiler, side skirt, and rear spoiler at the same time.
Material: Sports muffler / Stainless steel
Rear diffuser / Resin (PPE)
Size (Sports muffler): Tail-end / φ76mm
Ground clearance: Approximately 36mm down from the original

19 inch forged aluminum wheelset – 638,200 yen
A lightweight, high-rigidity forged aluminum wheel that has been specially developed while paying particular attention to the shaping of the spokes.
By reducing the unsprung weight and improving the rigidity, it contributes to supple ride quality and stable road-holding performance.
* A higher effect can be achieved by installing the member brace performance damper ® at the same time.
Material: Forged aluminum (1 piece)
Color: Oak gray metallic
Size: 2WD [Front] 19 inch x 8.5J Inset 45mm,
[Rear] 19 inch x 9.0J Inset 52mm
Weight: [Front] 11.7kg, [Rear] 11.9 kg
* Recommended tire size: [Front] 245 / 35R19, [Rear] 265 / 30R19

Performance damper – 65,000 yen
By effectively damping deformation, noise, and vibration during driving, it brings excellent effects such as improving steering stability and comfort as well as high-quality driving.
* A higher effect can be achieved by installing the member brace and forged aluminum wheels at the same time.
* This product takes into consideration the effect on the operation of the pop-up hood.
* IS300h can only be installed on the rear.
* “PERFORMANCE DAMPER” is a registered trademark of Yamaha Motor Co., Ltd.

Member brace – 103,500 yen
body floor from front to back in a well-balanced manner, the suspension more effectively receives input from the road surface and contributes to a supple ride and stable road-holding performance.
* Higher effect can be achieved by installing Performance Damper® and forged aluminum wheels at the same time.
Material: Steel
Ground clearance: Approximately 10mm down from the original