Description

-It is a genuine carbon bonnet. Approximately 7.0kg weight reduction for approximately 3.5kg with 2 plies of 1 ply of FRP and 1 ply of carbon compared to 10.5kg of genuine. By adopting carbon, it became more sporty.

● Genuine hinges are used. The part where force is applied (bottom photo) is firmly rigid.

Specification
Material: Wet carbon (1 ply of carbon + 1 ply of glass mat)
Size Same size as genuine
Weight about 4.0kg
Mounting/Processing A bonnet pin (sold separately) is required.
Compatible models: Jimny JB23/4-8 type

Optional Airscoopt is here 

About FRP/carbon parts
●FRP/carbon parts are handmade. Therefore, please note that there may be slight deviations in hole positions, burrs, gloss, etc.
-The surface of FRP/carbon parts is gel-coated. Requires priming and painting. Painting can prevent deterioration due to UV rays.
●The specifications of the reinforcement on the back of the FRP/carbon parts are subject to change without notice. Therefore, there may be slight differences between the product you purchased and the photo shown, but please understand that there is no particular problem in using it.

Note
●FRP/carbon parts are completely made-to-order products. Therefore, we cannot accept cancellations after an order has been placed.
●After receiving the FRP/carbon parts, please be sure to check that there is no damage.
●We cannot accept returns or exchanges due to the customer’s convenience, except for product defects or damage during transportation.
●FRP/carbon parts are produced after receiving an order, so it takes time to ship. Please note that if you order items other than FRP/carbon parts, they will be shipped together with the FRP/carbon parts.
●If the FRP bonnet is installed on a vehicle that allows the front window to be folded down, the FRP bonnet may be damaged if the front window is folded down.