Description

JAOS Fender Garnish type-X Painted Matte Black – 135,400 yen / [Unpainted] – 113,400 yen
Although it is a tight size of less than 10 mm on one side, it has a strong presence due to its precise design, and at the same time, the original dummy bolt creates a wild side view.

Product details Fender garnish body (8 pieces), dummy bolt (32 pieces)
specification Body: ABS (painted product: matte black/grained paint)
Dummy bolt: ABS, chrome plating

Mounting method Processing required
Installation time 2.5 hours
Dimensions when mounted Overall width: less than + 20 mm

A genuine mudguard can be installed.
JAOS Mudguard III can be installed (removal of the genuine mudguard is required).
* “JAOS Mudguard vehicle-specific mounting kit” is under development.
ZX, VX, AX, and GX cannot be installed.
Cannot be installed on vehicles with modellista aero parts.

Drilling is required inside the front fender liner and rear bumper (1 place each).

The attached end molding color is “black”. “Gray” is available as an option.
Product number: G996002 Price: ¥ 500 (¥ 550 including tax) /1.0m * 8m is required to install one unit

Dummy bolts are available in “black” as an option.
Part number: D134102 Price: ¥ 3,000 (¥ 3,300 including tax) / 32 pieces * 32 pieces are required to install one unit

Unpainted product is available / Part number: B135052NP (for GR SPORT)

FLAT RACK SET 1250X1400 ROOF RAIL TYPE-A (4 LEGS) – 138,700 yen
The main body is made of lightweight and strong extruded aluminum and has toughness specifications that assume hard use while suppressing the increase in vehicle weight. By installing an option in the T slot provided on the floor bar, you can arrange it according to your needs and expand it to your favorite style. It is a high-quality roof rack that is particular “MADE IN JAPAN” with various functionality and reliability.

Product details Body (floor bar x 6), foot set x 4, emblem sticker x 1
■ Body
material: Aluminum
color: Black alumite
Size: W1250mm x L1400mm (Thickness: Corner cap 39mm, Aluminum frame 32mm)
■ Emblem sticker
material: PVC material (high boscal)
Size: 85mm x 18mm

Mounting method Bolt-on
Installation time 2.0-2.5 hours
Dimensions when mounted Overall height: +80-85mm

DOOR HANDLE PROTECTOR LC300 – 8,400 yen

A door handle protector that prevents scratches and dirt on the door handle that may be inadvertently attached when the door is opened or closed. The special design is cut according to the shape (dent) of the door handle of the car model, and the carbon-like design dresses up the door handle as sporty. Since it adheres to a strong adhesive surface, it can be firmly attached without being easily peeled off.

Product details 4 for the door handle
specification Carbon-like PVC material

BATTLEZ 2TAIL-PIPE EXHAUST (ZS-2) LC300 21+ F33A / 3.3L – 100,000 yen
High-quality full stainless steel muffler with two oval tails on each side. Engraved with the BATTLEZ logo that enhances the sports mind. You can enjoy the crisp sound and the light bubbling that is typical of a sports muffler. With a certification plate issued by a certification body that has cleared the new noise regulations, you can use it with confidence without worrying about vehicle inspections.

Product details Rear piece, nut, muffler ring
specification Rear piece: Stainless steel, Φ70
Tail: Stainless steel, Oval (115 x 61) x 2
BATTLEZ logo engraved 2010
Noise regulation-compliant plate
Proximity exhaust noise 78dB Acceleration running noise 82dB
Performance etc. Confirmed Display content: JQR10221012

Diesel (3DA-FJA300W)

Vehicles equipped with “MODELLISTA Rear Styling Kit (Rear Skirt + Muffler Cutter)” cannot be installed at the same time.
* Can be installed if the muffler cutter is removed.

BATTLEZ muffler cutter MC black type-A Land Cruiser 300 series GR SPORT – 36,400 yen
This is an oval-type muffler cutter that uses “heat-resistant matte black paint”. The unassuming matte texture gives the rear view a casually heavy feel. The material is stainless steel, which is durable and resistant to rust. It is a dress-up part that can be easily installed using a dedicated U-bolt at the end of the muffler while maintaining the performance, sound quality, volume, etc. of the genuine muffler.

Product content muffler cutter, U bolt, bracket
specification Tail: Stainless steel, oval type, BATTLEZ logo engraved
Surface treatment: Heat-resistant matte black paint

Gasoline car (3BA-VJA300W)