Description

For Land Cruiser GRJ76K, HZJ76, Prado 78 (long wheelbase models).
Heavy-duty bumper designed to maximize departure angles while minimizing lateral protrusions. Protects the rear corners, which are prone to damage during off-road driving.
Equipped with lamps including 12V LED stop/tail/turn signals and reflectors. (Approx. dimensions: 795mm height x 1495mm width x 330mm depth)
Made of 6mm steel, painted black.
※ Cannot attach genuine mud flaps.
※ The bumper does not include a reverse light.

【Options】
● Heat shield for muffler (used when the tailpipe is close to the lamp due to the shape of the muffler. Not required for stock mufflers)
● Turn signal relay to prevent hyper flashing (no adjustment for flash rate)
● Turn signal relay to prevent hyper flashing (with adjustable flash rate)
● Replacement tail lamp only (for repairs in case of damage) 14,500 yen/set for left and right

※ The relay replaces the genuine part located on the upper left inside the steering column.
※ The resistor should be connected to the plus/minus of the indicator wiring for both sides.
※ Replace the standard combination lamps on both sides with ones that light the tail/stop and indicators. If a non-LED 12V21W bulb is used in the indicator part, no hyper-flashing countermeasure is necessary.
※ When fitting an MTR rear bumper on a narrow-body (4-number) vehicle, the total width will be approximately 171 cm.

Option: Heat shield for muffler ¥4,200
Option: Flasher relay to prevent hyper-flashing, without blink rate adjustment ¥4,420
Option: Flasher relay to prevent hyper-flashing, with blink rate adjustment ¥4,640