JAOS BATTLEZ Lift Up Set AJ For Jimny JB74 Series A732518C

Product number: A732518C

This can be shipped via economy air to most parts of Asia, the US, and Europe. However, since this shipping cannot cover the territories, we may request an additional shipping charge after the buyer places the order.

Description

Basic information

A lift-up set that combines a coil spring with a guarantee of settling using a titanium compound material and a high-performance damper with adjustable damping force.

Product content	Front coil spring, rear coil spring, front damper, rear damper, long brake hose, leveler long bracket for vehicles equipped with LED headlamps.
Vehicle height	Lift up front: 35-40mm, rear: 35-40mm.

Spring

Wire diameter	Front 11.5Φ Rear 11.1Φ
spring rate	Front: 19.8N/mm, Rear: 20.5N/mm
Color	Silver

Shock absorber.

type	Low-pressure gas twin tube damper
Damping force adjustment	14 steps dial adjustment type
damping force	Front: Extension side -10~40%, Compression side -25~35% (0.3m/sec/genuine ratio) Rear: Extension side -5~35%, Compression side -15~0% (0.3m/sec/genuine ratio)
stroke	Front: +21mm, Rear: +31mm
body diameter	Front: Ø45.0, Rear: Ø45.0
piston diameter	Front: Ø25.0, Rear: Ø25.0
Color	gray metallic

Others

content	Comes with a leveler long bracket for vehicles equipped with LED headlamps. *It is not used in vehicles without LED headlamps, but it is included in this set.

Mounting information

Mounting method	genuine replacement
installation time	2.5 hours to 3 hours

Precautions/Supplementary Explanation

Comes with a warranty against wear and tear (coil spring only).
Need to replace the long brake hose. * Since brake hose replacement requires specialized knowledge, please replace it at a certified factory in the automobile disassembly and maintenance business.

Due to the lift-up, there is a possibility that the front side visibility standard (Section 44, Paragraph 5 of the safety standards) may not be met, and it may be necessary to add a forward visibility confirmation mechanism such as a front view camera.

Safety equipment such as driver assistance systems and collision avoidance systems of each automobile manufacturer may cause radars, cameras, sensors, etc. to misrecognize or malfunction due to changes in vehicle height. We are not responsible for any malfunctions of these systems due to changes in vehicle height due to our lift-up (or low-down) suspension installation, or accidents caused by malfunctions. Please note.

There is no interference between the front propeller shaft and the cross member by installing only our lift-up suspension.

Product weight: 19.25 kg
Packing weight: 21.65 kg