Description

Front spoiler (with LED) – 108,000 yen / [Without LED] – 66,200 yen
The painted body colors are available in Crystal White Pearl (K1X): A1, Crystal Black Silica (D4S): C0, Pure Red (M7Y): D1, Orange Metallic (H8R): E0
While the design stretches out to the front, the front, and rear aerodynamic balance is optimized by wrapping the spoiler around the step attached to the bottom surface of the vehicle bumper.
Material: Resin (PPE)
TRD ornament included Total length: approx .35mm plus
Ground clearance: approx. 25mm down
Emission color: White *The color and illuminance of the photo may differ from the actual one. *Drilling into the bumper is required.
Part Number: MS341-18005-NP
Instruction manual in Japanese Language. Please use Google Camera translation to read in English

Side Skirt – 72,800 yen
The painted body colors are available in Crystal White Pearl (K1X): A1, Crystal Black Silica (D4S): C0, Pure Red (M7Y): D1, Orange Metallic (H8R): E0
In addition to the appearance that is firmly spread in the wide direction, even the invisible part is wrapped around the bottom of the rocker molding to smoothly discharge the air that enters from the front of the vehicle to the bottom surface. Improves tire ground contact feeling.
Material: Resin (PPE)
Ground clearance: Approximately 35mm lower than the original
Width: Approximately 5mm more than the original
Part Number: MS344-18005-NP
Instruction manual in Japanese Language. Please use Google Camera translation to read in English

Rear bumper spoiler & high response muffler Ver. R – 220,000 yen / [Rear Bumper Spoiler Only] – 79,400 yen
The painted body colors are available in Crystal White Pearl: A0, Crystal Black Silica: C0, Spark Red: D0
This is a rear bumper spoiler with a 2-piece structure (upper and lower). The lower piece has a diffuser shape to improve straight-line stability.
Material: [Rear bumper spoiler] Resin (PPE)
[High response muffler Ver. R] Stainless steel
Ground clearance: about 10mm lower than the original
Size: [High response muffler Ver. R] Tail end diameter 89mm (4 pieces)
Overall length: Approximately 15mm longer than the original
Width: Approximately 5mm more than the original
*Rear bumper spoiler and high response muffler Ver. R must be installed at the same time. It is not possible to attach only the rear bumper spoiler to the vehicle’s standard muffler.
Part Number: MS313-18002-NP (Rear bumper spoiler) / Part Number: MS153-18004 (High response muffler Ver. R)
Instruction manual in Japanese Language. Please use Google Camera translation to read in English

High response muffler Ver. R & Muffler garnish set – 168,500 yen / [Muffler garnish set] – 36,500 yen
This is a muffler garnish set that allows you to install a high-response muffler without significantly changing the rear bumper design of your vehicle.
Material: [Muffler garnish] Resin (PPE)
[High response muffler Ver. R] Stainless steel
Part Number: MS313-18003 (Muffler Garnish) / Part Number: MS153-18004 (High response muffler Ver. R)
Instruction manual in Japanese Language. Please use Google Camera translation to read in English

Aero Stabilizing Cover – 37,600 yen
The painted body colors are available in Crystal White Pearl: A0, Crystal Black Silica: C0, Spark Red: D0
By filling the gap and step between the rear glass and the trunk, air flowing from the front flows smoothly to the rear, improving rear stability.
Color: Glossy black
Material: Resin (PPE)
*Double-sided tape is used for installation.
Part Number: MS346-18001
Instruction manual in Japanese Language. Please use Google Camera translation to read in English

Rear trunk spoiler – 55,000 yen
It adjusts the air flowing toward the rear of the vehicle and bounces it upward to generate optimal downforce.
Material: Resin (PPE)
Part Number: MS342-18002-00
Instruction manual in Japanese Language. Please use Google Camera translation to read in English

Rear side spoiler- 35,000 yen
By generating downforce at the rear, it improves the feeling of ground contact of the rear tires.
Set of 2 left and right
Material: Resin (PPE)
*Double-sided tape is used for installation.
Part Number: MS315-18003-NP
Instruction manual in Japanese Language. Please use Google Camera translation to read in English

Colored fender fins – 39,800 yen
While driving, it improves the feeling of front-ground contact by generating downforce at the front. The rectification effect also improves stability when cornering.
Set of 2 left and right, with TRD logo
Material: ABS resin
*For installation, replace with genuine fender garnish.
Part Number: MS345-18003-NP
Instruction manual in Japanese Language. Please use Google Camera translation to read in English

Aero Turbulator – 35,600 yen
Installed around the wheelhouses of the front and rear bumpers, it improves straight-line stability by changing the airflow on the sides of the vehicle.
Color: Black (unpainted)
Material: Synthetic rubber
*Double-sided tape is used for installation.
*This product is a rubber product and cannot be painted. In addition, deterioration such as cracks may occur on the surface during the use process.
Part Number: MS319-18001

Side stabilizing cover – 50,000 yen
By attaching it to the bottom of the side window and filling the gap under the window, it provides a rectifying effect. The straight-line stability of the vehicle is improved.
Color: Glossy black
Material: Resin (PPE)
*Double-sided tape is used for installation.
Part Number: MS316-18001

Rear window louver – 120,000 yen
Attaching it to the rear window creates a powerful rear style without obstructing the field of vision and also suppresses sunlight from entering the room from above.
Color: Matte black
Material: Resin (ABS)
Mounting: Fix the special bracket to the rear window with double-sided tape (8 places), and tighten the double-sided tape and trunk hinge bolt together (2 places). Bolt the louver body to the bracket.
*When cleaning the entire rear window, it is necessary to remove the louver body (8 bolts).
*This product is intended to improve styling and is not intended to improve aerodynamic performance.
Product Number : MS317-18001

Front Side Fender extension – 66,400 yen
By attaching it to the fender arch, it improves the appearance of the arch.
The shape also takes aerodynamics into consideration.
Set of 2 front left and right and 2 rear left and right
Material: Resin (ABS)
*Double-sided tape pasted & bolted
*Drilling into the body is required for installation.

<Note>
・TRD Fender extension is a dress-up accessory product. Please do not use it as a measure to prevent tires and wheels from sticking out.
・It is designed to expand the overall width by a maximum of 14mm by installing the fender molding (no need to change the description on the vehicle inspection certificate).
・If you use a combination other than the genuine Toyota wheel size (tire size) and the wheel size for TRD 86 (recommended tire size), there is a risk of interference.
・If the vehicle height is lowered than the TRD recommended vehicle height, there is a risk of interference.
・Tire chains (snow chains) cannot be installed as they may interfere.
Part Number: MS315-18005-NP

Rear Left Side Fender Extension 
Material Resin (acrylic)
By arranging aero-stabilizing fins in front of and behind the visor, the steering feel is improved and linear handling is achieved.
Part Number: MS315-18005-NP

Fender extension (compatible with TRD rear bumper spoiler)
By attaching it to the fender arch, it improves the appearance of the arch.
The shape also takes aerodynamics into consideration.
Set of 2 front left and right & 2 rear left and right
Material: Resin (ABS)
* Double-sided tape attached & bolt tightening * Installation requires drilling into the body.
<Note>
– The TRD fender extension is a dress-up accessory product. Please do not use it as a measure to prevent tires and wheels from sticking out.
・It is designed to expand the overall width by a maximum of 14mm by installing the fender molding (no need to change the description on the vehicle inspection certificate).
・If you use a combination other than the genuine Toyota wheel size (tire size) and the wheel size for TRD 86 (recommended tire size), there is a risk of interference.
・If the vehicle height is lowered than the TRD recommended vehicle height, there is a risk of interference.
・Tire chains (snow chains) cannot be installed as they may interfere.
Part Number: MS315-18005-NP

GR discharge tape (aluminum tape with GR logo) – 8,500 yen
Material: Aluminum
Size : [Small] W approx. 50 mm x H approx. 25 mm
Aluminum tape with GR logo. Sticking it in 4 places on the body removes the charge on the body and brings out the original performance of the vehicle.