Description

Front Under Spoiler – [Un Pianted] – 69,850 yen / [Painted] – NOT AVAILABLE
Attaches to the bottom of the bumper. Can be installed simultaneously with Aero Illumination as an option. Made of vacuum-formed PPE.
It is necessary to cut a part of the front bumper when installing.
Can be installed simultaneously with Honda’s genuine product halogen fog lights.
Even for unpainted products, the fog bezel part has a matte black paint finish.
Part Number: 71110-XLTB-K0S0-ZZ

LED Fog Lamp – 93,790 yen / Fog Lamp Attachment – 26,000 yen
An advanced high-brightness LED fog light that combines a high-performance projector unit and LED to create an ideal light distribution pattern for a fog light, achieving excellent visibility, low power consumption, and a long life. The illumination light is sharp white. Can be installed in combination with a MUGEN front under the spoiler or standard bumper. A separately sold mounting attachment is required for installation.
If you want to install LED fog lights after installing the front under the spoiler, you will need to remove the front under the spoiler.
Part Number: 08V31-XG8-LW01

Side Spoiler – [Un Pianted] – 67,800 yen / [Painted] – 78,500 yen NOT AVAILABLE
Two-tone side spoiler with colored and matte black paint. Installed by removing the standard equipment side sill garnish. Made of vacuum-formed PPE.
Part Number: 70219-XLTB-K0S0-ZZ

Rear Under Spoiler – [Un Pianted] – 65,800 yen / [Painted] – 73,000 yen  NOT AVAILABLE
A rear under spoiler with a two-tone finish of colored and matte black paint. The diffuser part is a separate piece structure. Installed by removing the standard diffuser. Made of vacuum-formed PPE. Can be installed simultaneously with an LED rear fog light as an option.
It cannot be installed at the same time as Honda’s genuine rear corner sensor/back sonar.
Even for unpainted products, the diffuser part has a matte black paint finish.
Part Number: 84111-XLTB-K0S0-ZZ

LED Rear Fog Light (OPTION) – 62,750 yen [DISCONTINUED]
High-brightness LED rear fog lights create a rear styling reminiscent of a racing car and are highly visible in bad weather. Comes with a lighting switch that can be attached to the instrument panel. Product that complies with safety standards.
Cannot be installed on a standard bumper.
Part Number: 34400-XLTB-K0S0

Front Sports Grille –  50,950 yen [DISCONTINUED]
The front sports grille is designed with the H mark as a motif. Installed by removing the standard grill. Infinity metal emblem included. Glossy black paint finish. Made of vacuum-formed PPE. A carbon license plate garnish can be installed as an option.
Part Number: 75100-XLTB-K0S0

Carbon Bonnet –  600,800 yen [ DISCONTINUD]
Lightweight and highly rigid bonnet made of dry carbon material. Achieved a weight reduction of approximately 5 kg compared to the stock model, improving turning performance during cornering. The surface is finished with a UV-blocking clear coat to prevent deterioration such as fading. Installed by removing the standard bonnet.
Part Number: 60100-XLTB-K0S0

Rear Wing – [UnPianted] – 94,800 yen / [Painted] – 99,750 yen [DISCONTINUD]
Attached to the upper end of the tailgate. Made of blow-molded ABS. Includes infinite metal emblem and dedicated tailgate open stay.
Support All grades of this car
Part Number: 84112-XLT-K0S0-ZZ