Description

[Pre-order sales scheduled to arrive after May] ZN8 86 ZD8 BRZ Valenti Jewel headlamp ULTRA for GR86/BRZ Sequential flowing turn signal Equipped with OEA opening action Safety standard compliant E-mark certified

The cornering lamp lights up to provide driver support.
When installing the cornering lamp, you can choose between steering-sensitive (steering angle control) or turn signal-linked (indicator control).
*If you want to select rudder angle control, separate wiring work is required.

A three-lens projector is used on each side for the LED low beam and high beam, creating an impressive front face.
When the high beam is on, the two outer lights will switch. Equipped with 3-lens LED projector

This is a feature installed in European cars that lights up the headlights in motion when the vehicle is locked or unlocked.
*The OEA function requires a constant power supply and connection to the ignition power supply.
Equipped with opening and ending action functions*

■Opening action

■Ending action

An LED bar is used for the position lamp and daytime lamp.
The daytime lamp lights up when the ignition is turned on. When the position lamp switch is turned on, the light will dim and become a position lamp.
*Separate wiring work is required when using daytime lamps. LED position & daytime lamp

When installing, it is possible to change the setting of the turn signal to “flow” or “not flow” by changing some of the wiring connections.
Adopts LED sequential turn signals

■Built-in high flash control resistor!
Built-in high flash control resistance in the head body, no need to worry about the high flash phenomenon! Installation is a coupler-on type that uses a genuine coupler.

■Safety standard compliance/1 year warranty
E-mark acquired. This product complies with safety standards.

[Compatible models]
●Toyota GR86/Subaru BRZ
Model: ZN8/ZD8 Year: 2021.10~/2021.7~ Compatible with all grades
•Low beam & high beam: LED (3-lens projector)
*High beams are 2 lights outside
•Position & daytime lamp: LED bar
*When the position lamp switch is turned on, the light will dim and become a position lamp.
•Blinker: By changing some of the LED wiring connections, you can change the setting to “flow” or “not flow”.
•Optical axis leveler: included with the product
•Cornering lamp steering angle control unit: Included with the product
Note: OEA function is only available on vehicles equipped with genuine keyless.
When the OEA function is connected, vehicles equipped with external security or external turn signal control relays may not operate properly.