Description

FRONT UNER SPOILER [FRP] – 86,500 yen
【size】Tire side: 20 mm DOWN Center: 60 mm DOWN
【accessories】BLACK LABEL plate
【remarks】
*This product is attached to the bottom of the bumper.
* Drilling is required on the bottom of the bumper.

Side Under Spoiler 4P [FRP] – 93,500 yen
【size】20mm DOWN
【remarks】
*This product is attached to the bottom of the genuine side step.
*It cannot be installed together with the genuine optional mudguard.
*It requires drilling on the bottom of the side step.

Rear Under Diffuser 4P [FRP] – 96,800 yen / [CARBON] – 140,800 yen
【size】15mm DOWN
【remarks】
*This product is attached to the side and bottom of the genuine bumper.
*It requires drilling on the inside and bottom of the genuine bumper fender arch.
*Since carbon products are not in the final finish state, we recommend a clear coat finish after temporary alignment.
Using Toray (CO6347 BL1500-3K), it becomes a twill weave.

Rear Under Diffuser 1P for 450h only [FRP] – 92,000 yen 
【size】20mm DOWN
【remarks】
*Unpainted

REAR GATE SPOILER [FRP] – 62,800 yen / [CARBON] – 98,000 yen
【remarks】
*This product is attached to the rear gate.
* FRP + CFRP products have a carbon finish on the surface and an FRP finish on the mounting surface.
*For carbon products, it is not in the final finish state, so we recommend a clear coat finish after temporary alignment.
Using Toray (CO6347 BL1500-3K), it becomes a twill weave.

Rear Roof Spoiler [FRP] – 51,800 yen / [CARBON] – 84,800 yen
【remarks】
*It is a product to be installed on the genuine roof wing.
*For carbon products, it is not in the final finish state, so we recommend a clear coat finish after temporary alignment.
Using Toray (CO6347 BL1500-3K), it becomes a twill weave.

OVER FENDER KIT 6P 30mm WIDE [FRP] – 172,000 yen / [CARBON] – 210,000 yen
【size】3cm wide / 2cm lower arch
【remarks】
*3 cm wide and 2 cm lower arch.
*It will be a product to be attached to the genuine body.
*It will be 30mm wide on one side when installed, so it will be necessary to change the structure.

REAR FENDER ARCH MOLE [FRP] – 51,800 yen / [CARBON] – 93,600 yen
【size】13mm wide on one side
【remarks】
*When installing, it will be 13mm wide on one side, so it will be necessary to change the structure.
*Since carbon products are not in the final finish state, we recommend a clear coat finish after temporary alignment.
Using Toray (CO6347 BL1500-3K), it becomes a twill weave.

 FRONT BUMPER GARNISH 2P [FRP] – 70,500 yen / [CARBON] – 92,500 yen
【Remarks】
*It is a product to be installed on the side of the LED cornering lamp on the front bumper.
*It is recommended to install it together with the 30mm wide OVER FENDER KIT because of its design.
*For carbon products, it is not in the final finish state, so we recommend a clear coat finish after temporary alignment.
Using Toray (CO6347 BL1500-3K), it becomes a twill weave.

FOG GARNISH 2P [FRP] – 48,500 yen / [CARBON] – 70,500 yen
【Remarks】
*It is a product to be installed on the side of the LED cornering lamp on the front bumper.
* FRP + CFRP products have a carbon finish on the surface and an FRP finish on the mounting surface.
*For carbon products, it is not in the final finish state, so we recommend a clear coat finish after temporary alignment.
Using Toray (CO6347 BL1500-3K), it becomes a twill weave.

REAR BUMPER GARNISH 2P [FRP] – 41,800 yen / [CARBON] – 62,800 yen
【Remarks】
*This product is attached to the side of the rear bumper reflector.
*For carbon products, it is not in the final finish state, so we recommend a clear coat finish after temporary alignment.
Using Toray (CO6347 BL1500-3K), it becomes a twill weave.

CARBON MIRROR COVER – 48,500 yen