Name: BATTLEZ VF-R lift up set Ver.B (30) FJ Cruiser (10+)
Availability: InStock

BATTLEZ VF-R lift up set Ver.B (30) FJ Cruiser (10+)

Product number:A743245B
Excluding X-REAS cars

Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.

Description

Basic information

Based on the KYB high-performance damper used in international rallies, this set includes a premium damper with a reservoir tank and a Ti-W BATTLEZ lift-up spring that comes with a fatigue guarantee. Ver. B has a lift-up amount of approximately 30mm for both front and rear.

Product contents	Front: Lift spring for vehicle height adjustment, damping force adjustable damper with reservoir tank (vehicle height adjustment/dedicated wrench included) Rear: Lift spring, damping force adjustable damper with reservoir tank, reservoir tank fixing bracket
Vehicle height	Lift up front: 20-60mm, rear: 25-35mm

spring

Wire diameter	Front 15Φ Rear 16Φ
spring rate	Front 106N/mm, rear 28N/mm
Color	Silver

shock absorber

type	Front: High-pressure gas-type monotube damper (upright single-cylinder gas), vehicle height adjustment, Harmofleck® mechanism Rear: High-pressure gas-type monotube damper (inverted single-cylinder gas)
Damping force adjustment	High-speed side stepless damping force adjustment type, low-speed side 20-step dial damping force adjustment type
damping force	Front: 48% on the rebound side, -29% on the compression side (median adjustment range / 0.3m/sec/stock ratio) Rear: 70% on the rebound side, -15% on the compression side (median adjustment range / 0.3m/sec/stock ratio)
stroke	Front +8mm, rear +15mm
Body diameter	Front 43.5φ, rear 51φ (genuine 45φ)
Piston diameter	Front 40φ, rear 46φ
Color	gray metallic

others

Content	Separate tank fixing bracket: Steel, cationic electrodeposition coating

Installation information

Installation method	Genuine replacement Genuine front upper mount diversion
Installation time	2.5 hours to 3 hours

Notes/Supplementary explanation

Cannot be installed on X-REAS vehicles
2010 model ~ (left-hand drive) can be installed
The back lamp must be relocated when installed on cars registered after 11.01
The vehicle height adjustment function is only available at the front
Warranty included (coil spring only)

Packing size : H:525 × W:400 × D:420 mm / H:230 × W:280 × D:1000 mm
Product weight: -kg
Packing weight: -Kg