Description

The shape is designed from scratch with a focus on an inverted trapezoid that does not interfere with visibility. Eliminate unnecessary buttons. (There is only a small power button on the top!)
An ultra-simple design that you won’t even notice it’s a digital mirror!
The monitor is 9.66 inches and has a resolution of 1920×480.

The COAPLUS logo is vividly displayed during the opening and ending. (About 2 seconds)
The ending logo is not displayed when setting time-lapse recording.

A large number of car model-exclusive brackets are prepared, and they can be installed like a genuine ones!
It may be possible to install it using a general-purpose ball bracket even if the car model does not have the setting.

A front camera is embedded behind the mirror and functions as a drive recorder. While recording, you can shoot with the front and rear cameras at the same time, and you can also shoot still images. In addition, a parking monitoring function and impact recording functions are also installed. Dark current during parking monitoring is about 8-10mA, and time-lapse recording is about 240-280mA.

When the car battery voltage drops below 11V, the power will automatically turn off.

Parking monitoring recording, especially time-lapse recording, will burden the vehicle battery and may shorten its life.

All operations other than the power supply are touch panel operations on the mirror part where the image is projected. You can intuitively change the vertical angle of the projected front and rear views.

The front and rear F1.8 high-performance cameras with about 2 million pixels display bright front and rear views even when driving at night.
Recording resolution: 1296p+1080p

The rear camera can be installed both inside and outside the vehicle (waterproof IP67). Please specify which one when ordering. Shift reverse interlocking is possible. The angle of view automatically switches to reverse (back) mode, and guidelines are also displayed.