Description

FRONT HALF SPOILER [PAINTED]  – 85,0000 YEN / [PARTIAL CARBON SPECIFICATION] – 120,000 YEN
For late model (September 2017-) Standard bumper car
・Made of FRP, gel coat finish, unpainted product
A front spoiler that fits over the normal bumper. By increasing the solid feel of the front, it creates an impressive low form even with the normal vehicle height.
You can choose from two types: all FRP specifications and partial carbon specifications.
A plastic mesh net is installed as standard on the duct part of the spoiler.
It has a high-quality finish with attention to detail.
*Also compatible with Black Edition and 70th Anniversary models.
*About optional parts
A day lamp panel with 5 Japanese-made LED bulbs embedded on one side is available separately.

LED DAY LAMP PANEL [PAINTED]  – 65,0000 YEN
This is a day lamp panel with 5 LED bulbs made in Japan embedded on one side in the front half spoiler made by Elford. By installing day lamps, you can dress up your vehicle and improve vehicle visibility at the same time. Furthermore, the connection coupler uses a waterproof type, so it has a reliable specification that minimizes the risk of poor lighting.

30MM OVER FENDER FOR ELFORD HALF SPOILER ONLY – 80,000 YEN
・Made of FRP, gel coat finish, unpainted product
・30mm wide (one side)
・All 6 pieces (with backside)
This is an over-fender exclusively for the Elford half spoiler for late models. By combining it with a half spoiler, it adds an accent to the side view, increases the sense of width, and transforms it into an impressive appearance.
*Structural changes are required due to changes in vehicle width.

REAR HALF SPOILER & 4-PIECE MUFFLER WITH LED REFLECTORS – 228,950 YEN / REAR HALF SPOILER – 106,800 YEN /LED REFLECTORS – 15,450 YEN
For late-model (September 2017- ) * For gasoline vehicles, there are settings for vehicles from September 2017 to July 2020 and for vehicles after August 2020. Please let us know the model year when ordering.
・ Conforms to safety standards (vehicle inspection compliant product)
・ FRP unpainted gel coat finish
・ Dedicated reflector included
・ Bottom spare tire can be installed
* The rear side tow hook must be removed to install the muffler
It is a set product of a half-shaped rear spoiler that is attached over a normal standard bumper and a dedicated muffler for vehicle inspection.
Since it does not use a genuine reflector, it is a half-type but has a big makeover from the original.
Stainless steel is used for the attached dedicated muffler. The tail end uses an oval-shaped 115mm tail for a simple yet powerful rearview. Equipped with a tailslide function, the spoiler can be adjusted to the desired protrusion width.
* The product has holes for the rear corner sensor and the back sensor.
If the car is not equipped, please purchase a dummy sonar (sold separately).
Sold separately: LED reflector
By replacing and wiring from the genuine reflector, the small / brake double lighting is realized with 30% light emission when the small lamp is lit and 100% light emission when the brake lamp is lit. Not only the rearview dress-up effect but also the visibility from the following vehicle is improved, and the rear-end collision prevention effect is also demonstrated.

Sold separately: Dummy sonar for rear half spoiler, Dummy sonar for cars without the genuine optional clearance sonar. Attach it to the back of the product with double-sided tape.
* The product is not painted.
* “Dummy sonar for rear half spoiler” can also be purchased at the online shop.

AERO STEP COVER – 94,700 YEN
Compatible with all models (for standard sidestep installation)
・ Gel coat finish made of FRP
・ With the Elford emblem
It is possible to lower the ground height by 60 mm by covering it with a genuine plate-type sidestep. Achieves sporty styling by balancing the side view volume when an externally made aero and genuine OP aero are installed. In addition, one of the features is the modeling that supports separate paintings. The amount of overhang of the main body has also been taken into consideration so as not to impair the ease of getting on and off.
(Ground height) 60mm down from the original

 
SONIC ART ALLOY WHEELS – 388,200 YEN
The concept of Sonic Art is a “Fusion of performance and beauty of appearance”. By adopting a cover type that has little effect on the design and combining it with the concave shape that is dropped from the outermost circumference of the rim to the center part, it has a spoke shape that is supple and stretches from the center to the rim end. In addition to a sophisticated design such as diamond cutting on the spoke surface, the flow-forming method realizes the ultimate lightness (13.4 kg/piece). Although it is 22 inches in size, it is lighter than the genuine wheel, so it also emphasizes athletic performance. Sonic Art is the “lightest and most powerful wheel for Prado”, which is suitable for calling it art that combines performance and aesthetics.
Size: 22 x 9.5J 6H-139.7 Inset +20
Color: Sonic Black / Diamond Cut Face
Flow forming method
Accessories: Aluminum center cover set, Aluminum black air valve
Standard: JWL, VIA standard-compliant product