Description

JAOS Fender Garnish type-X Painted Matte Black Yaris Cross – 95,800 yen / [Unpainted] – 73,800 yen
FENDER GARNISH TYPE-X YARIS CROSS 20+ MATTE BLACK
Although it is a tight size of less than 10 mm on one side, it has a strong presence due to its precise design, and at the same time, the original dummy bolt creates a wild side view.
Product details Fender garnish (6 pieces), dummy bolt (25 pieces)
specification Fender garnish type-X: ABS (painted product: matte black)
Dummy bolt: ABS, chrome plating
Dimensions when mounted Overall width: less than + 20 mm

It is necessary to drill holes inside the front bumper (1 place each on the left and right) and inside the rear fender (1 place each on the left and right).
The attached end molding color is “black”. “Gray” is available as an option.
Product number: G996002 Price: 550 / 1.0m including tax * 6m is required to install one unit
Dummy bolts are available in “black” as an option.
Part Number: D134102 Price: 3,500 yen / 32 pieces * 25 pieces are required to install one unit
* This product is not compatible with Toyota teammate [Advanced Park (with panoramic view monitor)]

JAOS Mudguard Vehicle-specific mounting kit Yaris Cross – 36,000 yen
JAOS Mudguard A vehicle-specific mounting kit that facilitates the installation of general-purpose types. Bolts and paper patterns for flap cutting are packaged in the set for one unit. The mudguard body is not included. If you want to install it in the front and back, please prepare two sets of “JAOS Mudguard III General-purpose M size” separately.
Product details Vehicle-specific mounting bracket, bolt set, 1 paper pattern
Dimensions when mounted Front: 110mm Rear: 150mm * Not hung with a belt

BATTLEZ Muffler Cutter Ti Titanium Tail Hybrid & Gasoline 2WD Yaris Cross – 36,400 yen
BATTLEZ TAIL-CUTTER TITANIUM TYPE-D
“BATTLEZ muffler cutter Ti” adopted the titanium tail (Φ90) which has been adopted in the BATTLEZ muffler Ti series. It is a dress-up part that can be easily attached using a dedicated fixed band at the tip of the muffler while maintaining the performance, sound quality, and volume of the genuine muffler. It comes with an illustrated instruction manual that also assumes DIY installation work. Also, you don’t have to worry about car inspections.
Product details Muffler cutter, fixing band
specification Muffler cutter body: Stainless steel Tail: Titanium, Φ90, BATTLEZ Blast logo

BATTLEZ Muffler Cutter Ti Titanium Tail Gasoline Car 4WD Yaris Cross – 36,400 yen
BATTLEZ TAIL-CUTTER TITANIUM TYPE-B
“BATTLEZ muffler cutter Ti” adopted the titanium tail (Φ90) which has been adopted in the BATTLEZ muffler Ti series. It is a dress-up part that can be easily attached using a dedicated fixed band at the tip of the muffler while maintaining the performance, sound quality, and volume of the genuine muffler. It comes with an illustrated instruction manual that also assumes DIY installation work. Also, you don’t have to worry about car inspections.
Product details Muffler cutter, fixing band
specification Muffler cutter body: Stainless steel Tail: Titanium, Φ90, BATTLEZ Blast logo

BATTLEZ Lift Up Spring Ti-W Hybrid & Gasoline 2WD Yaris Cross – 54,000 yen
BATTLEZ TiW COIL SET YARIS CROSS 20+ 2WD

Just replace the coil spring with the genuine damper to lift up about 20mm at the front and about 25mm at the rear. The coil spring, which uses a titanium compound material that has the characteristic of being “soft but chewy,” realizes a Yong-like silhouette without spoiling the kinetic performance. In addition, it comes with a settling warranty so that you can use it with peace of mind for a long period of time.

Product details Front coil spring, rear coil spring, front strut bolt
Vehicle height Lift-up (hybrid vehicle)
Front: 20-25mm, Rear: 20-25mm

Lift-up (gasoline vehicle)
Front: 20-25mm, Rear: 25-30mm
Wire diameter Front: 13Φ Rear: 12.5Φ
Spring rate Front: 22.2N / mm, Rear: 20N / mm
Color: Silver
Mounting method Genuine replacement

BATTLEZ Lift Up Spring Ti-W Gasoline Car 4WD Yaris Cross – 54,000 yen
BATTLEZ TiW COIL SET YARIS CROSS 20+ 4WD

Just replace the coil spring with the genuine damper to lift up about 25mm at the front and about 20mm at the rear. The coil spring, which uses a titanium compound material that has the characteristic of being “soft but chewy,” realizes a Yong-like silhouette without spoiling the kinetic performance. In addition, it comes with a settling warranty so that you can use it with peace of mind for a long period of time.

Product details Front coil spring, rear coil spring, front strut bolt
Vehicle height Lift-up
Front: 25-35mm, Rear: 20-25mm
Wire diameter Front 13.5Φ Rear 13.5Φ
Spring rate Front: 25.5N / mm, Rear: 48.0N / mm
Color Silver
Mounting method Genuine replacement