Name: Monster Sport TOUGH Engine Hood Duct for Suzuki Jimny
Availability: OutOfStock

Monster Sport TOUGH Engine Hood Duct for Suzuki Jimny

¥63,000

This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.

Out of stock

Description

Air outlet duct that enhances the cooling effect and gives off a unique look.
High-performance gear that improves the functionality of engine hoods.

■Cooling performance
By creating a new opening in the engine hood (bonnet), heat within the engine room is released.
It is possible to continue drawing fresh air into the engine room, maximizing the cooling performance of the radiator and intercooler (JB64W only).
In addition, when used together with the TOUGH front grill, even better effects can be achieved.

■Functional shape
The duct shape creates a negative pressure area in the airflow on the side of the bonnet, sucking out air more efficiently and improving engine compartment cooling.

■Molding unique to FRP
It is composed of surfaces that skillfully express undulations and curves by taking advantage of the characteristics of FRP material—a stylish combination of aggressive ruggedness and three-dimensionality.

■Compliant with external protrusion standards
It complies with the new exterior standards (external protrusion regulations), making it ideal for cars you want to continue driving for a long time.

Material	FRP
specification	Unpainted Black gel coat finish 1 2 * Separate coloring is required.
set content	・Engine hood duct (bonnet duct) body ・Mesh (powder coating finish) ・Set of mounting bolts ・Vent hole drilling pattern ・Instruction manual
Installation	・Engine hood (bonnet) drilling process [bolt holes + vents] * When installing on the genuine bonnet, be sure to apply anti-rust treatment to the drilled areas. } * Bolt holes will be machined at φ6.5 x 8 locations on the left and right, matching the actual parts. A φ15 hole saw is required to process the back side of the hood. * Vent openings are made using an air saw, hole saw, etc., following the included pattern.
Standard installation time	3.0h (excluding painting)
Vehicle dimensional changes	This is reference data related to the safety standards of the Road Transport Vehicle Act (as of July 2019) (all items other than this product are in normal condition). Also, only when used per the specified mounting conditions and handling methods. Please note that this may not apply depending on the combination of customized parts etc. that are installed at the same time.
others	This is reference data related to the safety standards of the Road Transport Vehicle Act (as of July 2019) (all items other than this product are in normal condition). Also, only when used under the specified mounting conditions and handling methods. Please note that this may not apply depending on the combination of customized parts etc. that are installed at the same time.