Description

Function hidden in simple styling. Cross-country style bumper that realizes maximum departure angle.

● This is a square-type rear bumper for real off-roaders. Installation requires relocating the license plate, spare tire, and combination lamp (sold separately).
●The left and right body mounting brackets are 9mm thick. The brackets have Φ70mm towing hooks and Φ18mm shackle mounting holes. It is effective for ideal towing work when stuck.
●The bumper body is 3.2mm thick and can withstand hard driving and use. A reinforcement plate on the inside of the bumper makes it very sturdy. A high-lift jack can be used. (However, it cannot be used outside the bumper mounting bracket.) A receiver hitch or pintle hook can be bolted onto the four holes in the center of the bumper. The maximum towing capacity is 500kg.
●The bumper is attached to the existing holes at the frame’s rear end with two M12 bolts on each side for a total of four points. At that time, the body is machined to ensure clearance between the sockets on the back of the left and right combination lamps and the body.
●A “rear corner garnish” is available separately to cover the unevenness of the body side caused by removing the genuine bumper. It gives the body side a stylish finish.

[Caution]
*When removing the lamp wiring assembly from the genuine bumper, be sure not to forget the antenna (a black rectangle about 5cm x 1.5cm) for the keyless back door lock/unlock.