Description

No compromise on form and functionality stripped down to the bare minimum. Extreme cross-country style bumper

●Front bumper for real off-roaders. Bringing together the know-how cultivated with the JB23, it combines strength and various functions without sacrificing the approach angle. Clearance that does not interfere with the front tires at all. A full-scale bumper that can withstand hard driving and use.

■Can be equipped with electric winch WARN AXON55/VRX45/PV45
AXON55, VRX45 or PV45 can be installed as is. (PV45 base plate is not used.) Equipping the Jimny with a winch, which is said to be the fifth drive, will dramatically improve off-road performance from stack recovery to rescue and various towing work.

■Can be used with high-lift jacks
Five round holes are placed in the skid guard at the bottom center of the bumper. In addition to reducing weight and cooling the radiator, the skid guard can be used as a point for a high-lift jack. The jack can be used stably without slipping.

■ Equipped with a shackle bracket essential for towing
Shackle brackets of 18mm thick steel are placed on the left and right. Shackles with a pin diameter of 19mm or less (from models sold after May 2022 due to changes in bumper specifications), shackle mouth width of 19mm or more, and eye diameter of 38mm or less can be installed. The range of towing, such as double lines, is expanded.

■ Genuine fog lamps can be installed
The genuine fog lamps can be installed by removing the round covers on both sides of the bumper and using the separately sold “genuine fog lamp installation set.” Because the set is installed at an angle, it brightly illuminates the side of the vehicle and is effective for night driving. We also recommend the “genuine fog lamp guard,” an even more durable lamp guard.

■ Genuine headlight washer can be installed

■ Optional “side bumper”
The “JB64 side bumper left and right set” and “JB74 side bumper left and right set” are available separately for normal driving and vehicle inspection. Since it is installed from the front with four bolts on one side, it can be easily removed in extreme stages.
*[Important] The Cross Country Winch Bumper alone does not cover the front of the tire, so it is not compliant with vehicle inspections. Be sure to install the left and right side bumper set for vehicle inspections.

■ Optional “Lamp Stay”
To add fog lights, essential for night driving, the separately sold “Lamp Stay” for fog lights can be installed with a bolt-on. It also contributes to Spartan styling.

*Fog lights are not compliant with vehicle inspections.

■ Optional “Front Corner Garnish”
The “Front Corner Garnish” is available separately to cover the unevenness of the lower part of the body when the side bumper is not installed. The side bumper can also be installed on top of the garnish.

■ Optional “Stabilizer Spacer”
It is necessary when installing the Cross Country Winch Bumper and raising the suspension by 2 to 3 inches. The “Cross Country Stabilizer Spacer” lets you install a stabilizer simultaneously.