Description

■Monocoque caliper set Opposing calipers can have higher body rigidity than stamped calipers, so they have advantages such as lower drag torque and no one-sided wear of the pads. The monocoque caliper has a Monoblock structure and is made using a mold precision casting method and can be installed with just bolts on without any processing and can be used for front/rear brake distribution and ABS as is. In addition, the pads used are the same shape and size as the genuine S2000, and the rotor size is 300mm and the rotor thickness is up to 26mm. When installing a monocoque to CL7, DC2, and EK9, we have a special brake rotor of 300mm t = 26mm.
—
Notes & special notes
Opposing calipers that have pistons on the outside are wider than normal calipers, so depending on the wheels they are installed on, they may interfere with the wheels. In that case, use spacers to prevent interference, but if you use spacers, there is a possibility that the tire may protrude beyond the fender of the vehicle. If the tires protrude from the vehicle body, the vehicle will not pass vehicle inspection. First, please check whether it can be installed on the wheels used by the shop where you are installing it. If you have any questions, please contact our sales department.