Name: TANABE DEVIDE UP210 LIFT UP SUSPENSION for SUBARU CROSSTREK
Availability: InStock

TANABE DEVIDE UP210 LIFT UP SUSPENSION for SUBARU CROSSTREK

Product Number: GUEUK

Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer place the order.

Description

Car model	Model year	Model	Drive/Displacement	Matching Grade
CROSSTREK	2020/9~	G.U.E.	4WD/2000/HV	Limited

Up amount (mm)		Spring rate (kg/mm)
front	rear	front	rear
+25〜+30mm	+20〜+25mm	2.7	2.8

Description of item
・This is a custom spring GUEUK from Tanabe’s DEVIDE UP210 series.
・A list that provides optimal ride comfort and improves drivability on snowy roads. The roll center and center of gravity of the vehicle are closer, roll is reduced, and cornering becomes smoother. Simply replace the spring to
achieve the ideal form and running. By uniquely designing the length, number of windings, rate, etc. of the spring, you can control the handling and vehicle height.
・Using the highest quality high-tensile steel, the world’s most advanced equipment and uncompromising technology, this spring is ultra-lightweight, ultra-durable, and ultra-tight.
・The special coating is overwhelmingly resistant to rust and peeling, so durability against scratches, snow removal agents, and rust is dramatically improved.
・Permanent sag guarantee and vehicle inspection compatible.

Set contents
Front x 2 / Rear x 2

*For vehicles with sunroofs
*No need to cut the genuine bumper
*Compatibility is based on manufacturer compatibility as of November 2023.
Please note that the “~Current” notation is a confirmation at that time, and compatibility may change due to model changes, etc. In addition, in any case, manufacturer compatibility will take priority in terms of accuracy of compatibility.

●Advanced 210 Technology that cannot be imitated by other companies
Tanabe springs are made of the highest quality high tensile steel and cold forming in the world’s most advanced equipment, using uncompromising technology, namely Tanabe 210 Technology, to create springs that are ultra-lightweight, ultra-durable, and ultra-tight.

●Special coating that is extremely resistant to rust and peeling The
base is treated with “zinc phosphate coating” and “cationic electrocoating”, which are also used in genuine parts from car manufacturers, and then the coating is strengthened with “powder coating”, dramatically improving durability and rust resistance against scratches and snow removal agents.

●Tanabe’s unique cold molding that combines durability and weight reduction
In contrast to hot molding, which is heated and coiled, Tanabe uses non-heated room temperature molding (cold molding). By using a unique double shot peening method during the molding process, the material is given forging properties, and a tensile strength of 2100N/mm is ensured. Tanabe’s unique molding process dramatically reduces sagging and reduces weight at the same time.