Description

Front spoiler [UNPAINTED] – 56,425 yen
Material: Resin (PPE)
Ground clearance: Approximately 64mm down from the original
Following the original factory-painted colors are available. Unpainted parts can also be purchased.
Here is the instruction Manual.

Side Skirt [UNPAINTED ] – 58,935 yen
By rectifying the wind flowing on the side of the body, straight-line stability is improved.
* A higher effect can be achieved by installing the front spoiler, quarter panel spoiler, sports muffler, and rear diffuser at the same time.
Material: Resin (PPE)
Ground clearance: Approximately 10mm down from the original
Here is the instruction Manual.

Sports muffler & Rear diffuser [UNPAINTED] – 186,830 yen
Sports muffler – 142,955 yen
Rear diffuser – 43,875 yen
The rear diffuser, which provides stable downforce and straight-line stability, is tuned for back pressure exclusively for HV vehicles to obtain rich torque characteristics while maintaining fuel efficiency.
* Sports muffler and diffuser are installed as a set
* A higher effect can be achieved by installing the front spoiler, side skirt, and quarter panel spoiler at the same time.
Material: Sports muffler / Stainless steel
Rear diffuser/resin (PPE)
Size (sports muffler): Tail end / φ70mm
Here is the instruction Manual.

Quarter panel spoiler [UNPAINTED] – 25,075 yen – Discontinued

It rectifies the wind flowing around the body, reduces rear lift, and contributes to improved running stability.
* A higher effect can be achieved by installing the front spoiler, side skirt, sports muffler, and rear diffuser at the same time.
Material: Resin (PPE)
Here is the instruction Manual

Front Aero Spats – 92,500 yen – Discontinued
It is attached to the underside of the engine cover to enhance the rectification effect of the body and improve steering stability.
Material: Synthetic rubber (EPDM)
Ground clearance: Approximately 25mm down from the original
Here is the instruction Manual

Member brace set  – 120,000 yen – Discontinued
By reinforcing the entire body floor from front to back in a well-balanced manner, Suspension more effectively receives input from the road surface.
It contributes to a supple ride quality and stable road-holding performance.
Material: Steel
Ground clearance: Approximately 29mm down from the original
* By installing it together with the forged aluminum wheel, it will be more effective.
Here is the instruction Manual

21-inch forged aluminum wheel & security locknut set – 397,200 yen – Discontinued

Lightweight and highly rigid forged aluminum wheels have been specially developed, with particular attention paid to the shaping of the spokes.
By reducing the unsprung weight and improving the rigidity, it contributes to a supple ride quality and stable road-holding performance.
* It will be more effective if it is installed at the same time as the member brace.
Size 18-7.5J 5H-100 inset 45mm
Material: Forged aluminum (1 piece)
Color: Gun metallic (matte finish)
Weight: 9.9kg
* A separate genuine wheel center cap (recommended: for “F SPORT”) is required for installation. The standard wheel center cap (for “F SPORT”) can be used.
* Tires are not included in this product. Separate tires (*recommended tire size: 225 /40R18) are required.
Here is the instruction Manual