Description

Front/standard stroke damper adopted Rear/genuine damper used. “Solenoid valve type” air suspension system. Air suspension x 4, normal port unit, torque switch controller, compressor, 4-gallon aluminum tank x 1, fitting, wiring… etc.
*The contents of the kit may differ depending on the model.
*Rear shock is not included.
* It is possible to change from a torque switch controller to an LED seesaw switch controller.

*When ordering, a copy of the vehicle inspection certificate is required.
*The contents of the kit may differ depending on the model.

□ At events, etc., we are doing a short up/down of the car equipped with the Bordeworld Air Suspension System, but this is only a demonstration to help you understand the features of the product. Normally, do not perform such operations.
If you do this on a general vehicle, the seal in the air suspension will heat up, causing a seizure, abnormal wear of the seal, seizure due to the heat of the compressor, poor compression, etc., and shortening the life of the air suspension and compressor.

□ The air suspension is originally intended to restore the normal vehicle height that has changed due to the passenger capacity and load. Raising or lowering the vehicle too much from the normal vehicle height not only makes the ride uncomfortable but also puts a strain on the body and air suspension.
It also changes the alignment, which reduces tire wear, controllability, and driving stability. Ride at a ride height that is set midway between the upper and lower limits of the comfortable air suspension.

□ Some parts of the Bordeworld Air Suspension System consist of consumable parts.
Although it depends on the frequency of use, we recommend regular inspections every 6 months. For regular inspections, please contact the dealer where the product was installed.

□ Air suspension is a different work than normal suspension replacement. Be sure to ask a knowledgeable professional to install and maintain the product.

□ It is possible to obtain a vehicle inspection for the Bordeworld Air Suspension System by applying for a structural change (fee required).
Vehicle inspection and maintenance after document application acceptance, vehicle carry-in structure change inspection, and registration should be done by the installation dealer or the customer.

□ Please feel free to contact us if you have any questions about repairs, version upgrades, regular inspections, etc.