Description

Product name: Shizuka Gozen muffler (for JB64)
Compatible with: Suzuki Jimny JB64 genuine rear bumper (MT/AT compatible)
Part number: 2004-40S
Material: Stainless steel (only the flange is steel)
Main pipe diameter: 42.7mm / 50.8mm
Outlet outer diameter: 76.3mm

Vehicle inspection: Compatible with vehicle inspection (new standard compatible)
Both AT and MT vehicles conform to the muffler pre-certification system
Country of manufacture: Japan (Made in Japan)

Accessories: 1 plate gasket, 1 TOTSUGEKI sticker
*Since there is no interference with the Suzuki genuine optional mud flap, it can be used together.

Muffler sound that matches the modern living environment

JB74 MT vehicle proximity noise level: 86.0db
JB74 MT vehicle acceleration noise level: 73.0db

JB74 AT vehicle proximity noise level: 80.0db
JB74 AT vehicle acceleration noise level: 75.0db

Both manual and automatic cars have low noise levels, but you can enjoy a sporty sound with very deep bass.
The sound during idling is extremely quiet, and this muffler is recommended for owners who are concerned about idling noise in their living environment.

Dynapack power tester results

Dynapack power test graph
Measured with a Dynapack power tester on the same vehicle with the genuine muffler and with the Shizuka Gozen muffler installed. When the Shizuka Gozen muffler is installed, both torque and power surpass the genuine muffler from the low rotation range to the high rotation range. In a comparison of the power peak value, compared to the genuine 52.938PS, the Shizuka Gozen muffler is 54.014PS, which is an increase of 1.076PS.

Features of Shizuka Gozen muffler for Jimny Sierra JB74
The Shizuka Gozen muffler matches the genuine rear bumper of the Jimny JB64. Although the product configuration is only a rear piece, it achieves the high performance of quiet performance and power up.
*The gasket for connecting to the genuine center pipe is included with the product.

[Proof of compliance with the new standard “certification plate”]

A certification plate is welded under the drum. Both Jimny JB64-MT and AT vehicles have passed the pre-test and are compatible with the pre-certification system of the new muffler standard.

[ Curl end and tone hole ]

The outlet has a double pipe structure that is also a feature of the Apio muffler. It is safe because the outer cylinder does not become hot. In addition, the curled end method with the outlet part rolled inward will not hurt your clothes or skin even if it comes in contact with it.
A tone hole is installed at the bottom of the outer cylinder to eliminate the muffled exhaust sound.

[Built-in “jet stream fin”]

The jet stream fin, which is the biggest feature of the series, is installed inside the Apio Shizuka Gozen muffler series.
In the low rpm range, it prevents over-disengagement and increases torque, and in the middle and high rpm range, it creates a vortex effect on the exhaust, greatly increasing the exhaust flow velocity. This effect achieves a wonderful blow-up and response.

In addition, the inner part of the muffler is made of stainless steel mesh, which has excellent corrosion resistance and is wrapped in super glass wool to achieve both excellent exhaust efficiency and noise reduction effect.

[Packing size and packing weight]
Packing size: 140cm x 29.5cm x 30cm (200 size)
Packing weight: Approximately 14kg