Description

[Compatible models]
Jimny JB64, JB74

[Product description]
A rear ladder that attaches to the hinge of the rear gate.
The 30mm back type has a wider clearance with the gate compared to the standard type, making it easier to put your feet on.
This equipment is convenient for loading and unloading luggage onto the roof rack.
The material used is stainless steel, which is resistant to rust. Total weight is about 3.8kg.
The surface is polished to a mirror finish. It has an eye-catching appearance.

By attaching it to the hinge of the rear gate, the distance between the fulcrum and the force point of a lever is shortened, reducing damage to the vehicle.
The slim shape does not interfere even when a large diameter tire (such as 225/75R16) is installed diagonally to the upper right from the original position. The width of the step (the part where you put your feet) is about 95 to 98 mm. *There may be slight differences depending on the product.
*When combining TOYO OPEN COUNTRY MT 225/75/R16 with our spare tire relocation kit (moves 82mm to the right, 106mm upwards), ensure a clearance of approximately 5mm when measured from the circumference of the tire.

30mm back type with wider clearance with the gate than the standard type, making it easier to put your feet on.

The 30mm back type has wider clearance with the gate than the standard type, making it easier to put your feet on. *The example image is a steel model.

Combination of TOYO OPEN COUNTRY MT 225/75/R16 and our spare tire movement kit (movement to the right: 82mm, upward: 106mm). Measure from the outer circumference of the tire to ensure a clearance of approximately 5mm. The width of the footrest (the part you put your foot on) is approximately 95-98mm. *There may be slight differences depending on the product.