Description

SUZUKI LED squid ring high power fog lamp Ver.2 -JB64W Jimny (XL/XC grade) JB74W Jimny Sierra (JC/JL grade)

Compatible car models
[HONDA]
・JF1/JF2 N-BOX (Modulo X)
・JF1/JF2 N-BOX custom
・JF1/JF2 N-BOX+custom
・JH1/JH2 N-WGN custom
・JG1/JG2 N-ONE (Premium/RS/Modulo X)
・RM1/RM4 CR-V
・CU1/CU2 Accord
・CW1/CW2 Accord Tourer
・ZE3 Insight Exclusive (XL Internavi Select)
・ZF2 CR-Z *Cannot be installed on the earlier model (ZF1)
・GK3/GK4/GK5/GK6 fit
・GK5 Fit RS
・GP5/GP6 Fit Hybrid
・RC1/RC2 Odyssey Absolute first half (until November 2017)
・RC4 Odyssey Hybrid first half (until November 2017)
・FK2 Civic Type R
[NISSAN]
・ML21S Luke’s Highway Star
・MG22S Moco/Moco Chocolatier (Aero style only)
・DR17W/DR64W NV100 Clipper Rio
・E26 NV350 Caravan
・E52 Elgrand latter half *After January 2014
・C26 Serena late period *After December 2013
・AZE0 Leaf Late (G Grade) *After November 2012
[MITSUBISHI]
・DS17W/DS64W Town Box
・MB15S Delica D:2 (S/SAS&G White Limited/SAS&G)
[SUZUKI]
・JB64W Jimny (XL/XC grade)
・DA17W Every Wagon (PZ Turbo/PZ Turbo Special)
・DA64W Every Wagon 5 type or later (PZ Turbo/PZ Turbo Special) *After May 2010
・MR31S/MR41S Hustler (J Style/X/Tough Wild)
・MR52S/MR92S Hustler
・MK32S/MK42S/MK53S Spacia Custom
・MK53S Spacia Gear
・MK42S Spacia Custom Z
・MK33V Spacia Base
・JB23W Jimny 5 type or later *October 2004 or later
・MH21S/MH22S Wagon R RR
・MH23S/MH34S/MH44S/MH22S Wagon R Stingray
・MK21S Palette first half (XS/T/TS) *Until September 2009
・MK21S pallet SW
・HG21S Cervo (TX/G Limited/SR)
・MF22S MR Wagon Wit
・HE22S Altrapan (TL package/X limited)
・HA24S Alto (X set option)
・HA36S Alto Works/Alto Turbo RS
・DA16T Carry Truck/Super Carry
・JB74W Jimny Sierra (JC/JL grade)
・JB43W Jimny Sierra type 4 or later *October 2004 or later
・YB11S/YA11S SX-4
・WB32S Baleno
・ZC13S/ZC83S/ZD83S Swift
・ZC53S/ZD53S/ZC43S Swift Hybrid
・ZC11S/ZD11S/ZC21S/ZD21S/ZD71S Swift
・ZC72S/ZD72S Swift/Swift RS
・ZC33S/ZC32S/ZC31S Swift Sport
・TA74W/TD54W/TD94W/TDA4W/TDB4W Escudo
・MA15S Solio (S/Black & White)
・MA15S Solio Bandit
・SC26 Landy 3 type *After January 2014
[MAZDA]
・MJ23S AZ wagon custom style
・MJ34S/MJ44S flare custom style
・MS31S/MS41S Flare Crossover (XT/XS)
・MM32S/MM42S Flare Wagon Custom Style
・DG17W Scrum Wagon (PZ Turbo/PZ Turbo Special)
・DG64W Scrum Wagon Late Period (PZ Turbo/PZ Turbo Special) *After June 2010
・HB24S Carol (X exterior package)
・JM23W AZ off-road *After November 2004
*For vehicles equipped with genuine halogen fog.
*Compatibility with genuine LED fog cars and non-fog cars has not been confirmed.
*There are car models that can be installed even without fog if you prepare a bracket etc.

Set content
・Lamp body left and right
・LED drive unit
・Harness
・Coupler (H8/H11/HB3/HB4)
・Electro tap

LED fog lamp using CREE high-brightness LED
This product uses reliable CREE 10W x 2 LEDs to achieve brightness and long life.

Built-in daylight function
Uses reliable CREE 9.5W x 2 LED specifications.
Built-in U-shaped daylight supports daytime driving.
Equipped with a function to turn off the lights at night depending on the wiring, and a switching function that can be used only with fog lamps.

Highly versatile universal design
A conversion coupler to H8/H11/HB3/HB4 is included as an accessory.
For vehicles equipped with H16, please process and install the included coupler.

Obtained E mark
Since it is designed specifically for the vehicle, it can be installed as a replacement for the genuine product.
There is no need to go through the trouble of making a stay.
There is also an optical axis adjustment mechanism, so you can rest assured.

With an optical axis adjustment mechanism
It can be adjusted up and down by turning the screw on the back of the main unit.
The bezel body is also screwed, so it has a wide adjustment range.

■Connection method

[LED drive unit side]
・Red line + (for daylight lighting/fog lighting): To ACC power supply, etc.
・Yellow wire + (connected only when using the daylight off function): To small etc. *1
・Red+/Black- wire: To fog lamp wiring *2

[Fog lamp light body side]
4-pole coupler: To LED drive unit

*1:
If you want to turn off the fog lamp when it is on, connect it to the + wire of the fog lamp.If you do not use the daylight extinguishing function, there is no need to connect it.

*2: The fog lamp will not turn on only by connecting the wiring.
Be sure to connect the red wire of the LED drive unit before use.
If you do not use the supplied coupler (if there is no applicable coupler), please connect the wires before use.

■Each lighting method
[Only daylight lights up]
Red-yellow line red → +
Black of red-black line → –

[Only fog lamps are lit]
Red-yellow line red → +
Yellow on the red-yellow line → ＋
Red of red-black line → ＋
Black of red-black line → –

[Both lit]
Red-yellow line red → +
Red of red-black line → ＋
Black of red-black line → –