Description

Front Spoiler [Unpainted] – 85,000 yen / [Painted]  – 105,000 yen / 5 LED spots (white) – 25,000 yen
material Made of FRP
code Base F/Painted H
Ground clearance: Approximately 21mm lower than the original
Part type half
Painted <White Pearl Crystal Shine 070> <Black 202> <Sparkling Black Pearl Crystal Shine 220>
Remarks
*Painted [single color]: Setting color only
*Painted [2 colors]: Two colors of setting color and gray metallic <1G2>
*Image is sold separately 5 LED spots (white) installed: 25,000 yen
* Book The product is designed with the assumption that 5 LED spots will be installed.

Side Step [ Unpainted] – 85,000 yen / [Painted] – 110,000 yen
material Made of FRP
code Base F/Painted H
size Ground clearance: Approximately 40mm lower than the original
Part type step
Painted <White Pearl Crystal Shine 070> <Black 202> <Sparkling Black Pearl Crystal Shine 220>
Remarks
* Genuine parts for all grades and below are required separately.
・Hole plug genuine parts required separately Product number: 90950-01944 / 12 pieces
* Genuine side step replacement type
* Painted [single color]: Setting color only
* Painted [2 colors]: Setting color and gray metallic 2-color painting
* The product is a common product for the first and second half of the vehicle that was developed for the first half of the vehicle.

Rear Half Spoiler for Left and Right Dual Extrusion [Unpainted] – 85,000 yen /[Painted] – 105,000 yen
Made of FRP
Ground clearance: Approximately 31mm lower than the original
Part type half
Painted <White Pearl Crystal Shine 070> <Black 202> <Sparkling Black Pearl Crystal Shine 220>
Remarks
* When installed, the genuine bumper reflector and muffler part require cutting
* Inner bezel for genuine back fog lamp installation Optional setting available
* Painted [single color]: Setting color only
* Painted [2 colors]: Setting color and <Dark Gray M 11GY09> Painted in two colors

◆The following options and genuine parts are required separately to install the back fog lamp.

■Vehicle without rear fog lamp
/ Inner bezel option 10,000 (excluding tax)
/ Genuine parts: Rear fog lamp FOG ASSY
product number: 81480-48080 12,700 (excluding tax)
Bracket product number: 81481-48210 620 (excluding tax)
* When installed, genuine bumper Cutting required
* Rear fog light Rear fog ≫ (Security Standards Article 37-2) Requires separate switch, wiring, etc. for installation.

■Cars with rear fog lamps
/inner bezel option ¥10,000 (excluding tax) On
cars with genuine rear fog lamps, the bumper cover rear fog cut line (hole) is slightly visible from the rear half center duct opening mesh, so please use the following parts as necessary. Please prepare. )
・Genuine parts: Bumper cover non-cold region specification (for no rear fog opening)
Product number: 52169-48100 ¥11,600 (excluding tax)
* Genuine bumper cut required when installed

Rear Half Spoiler for LS Muffler Finisher [Unpainted] – 94,000 yen /[Painted] – 115,000 yen / LS muffler finisher – 128,000 yen
Made of FRP
Ground clearance: Approximately 31mm lower than the original
Painted <White Pearl Crystal Shine 070> <Black 202> <Sparkling Black Pearl Crystal Shine 220>
Remarks
* Genuine parts for all grades and below are required separately.
・LS muffler finisher (extension SUB ASSY)
Product number R: 52106-50040 ¥6,600 (excluding tax) / L: 52107-50040 ¥6,600 (excluding tax)
As of September 15, 2015
* When installed, genuine bumper reflector and muffler section cutting required Processing
* When installed, the genuine muffler must be cut and processed, and the included muffler cutter (muffler cutter that releases exhaust gas to the LS muffler finisher) is installed. Depending on
use, there may be a reverberant sound during kickdown, etc.

* Inner bezel for genuine back fog lamp installation option available
* Painted [single color]: Setting color only
* Painted [two colors]: Setting color and <Dark Gray M 11GY09>

◆ To install the back fog lamp, follow the steps below. Options and genuine parts are required separately.

■Vehicle without rear fog lamp
/ Inner bezel option 10,000 (excluding tax)
/ Genuine parts: Rear fog lamp FOG ASSY
product number: 81480-48080 12,700 (excluding tax)
Bracket product number: 81481-48210 620 (excluding tax)
* When installed, genuine bumper Cutting required
* Rear fog light Rear fog ≫ (Security Standards Article 37-2) Requires separate switch, wiring, etc. for installation.

■Cars with rear fog lamps
/inner bezel option ¥10,000 (excluding tax) On
cars with genuine rear fog lamps, the bumper cover rear fog cut line (hole) is slightly visible from the rear half center duct opening mesh, so please use the following parts as necessary. Please prepare. )
・Genuine parts: Bumper cover non-cold region specification (for no rear fog opening)
Product number: 52169-48100 ¥11,600 (excluding tax)
* Genuine bumper cutting required when installed

Rear Roof Wing [Unpainted] – 63,000 yen /[Painted] – 79,000 yen
Made of FRP
Overall length: Approximately 68mm rearward than the original
Part Type Cover type
Painted <White Pearl Crystal Shine 070> <Black 202> <Sparkling Black Pearl Crystal Shine 220>
Remarks
* Painted [single color]: Setting color only
* Painted [two colors]: Setting color and <Dark Gray M 11GY09> are painted separately

. It has a structure that covers the antenna part.
FRP is a material with excellent radio wave transparency, and although the amount of attenuation of radio waves is small, please note that reception sensitivity may be slightly lower than before installation.

Executive muffler left and right dual output [V tail ] – 170,000 yen /[XII tail ] – 170,000 yen / [Titanium HYBRID tail] – 200,000 yen
size V tail 120 x 80 dual, titanium HYBRID tail 120 x 85 dual
Part type rear piece
Tail type
■Basic: V tail
■Option: Titanium HYBRID tail
(please specify when ordering)
tail end plate ■Basic: Black ■Sliding type/At the time of purchase: Black OR Red
■When purchasing the sliding type & Aero 3-piece kit at the same time: Gold OR Red OR Black
(Please specify when ordering)
*Titanium HYBRID tail only comes with a satin logo plate.
vehicle inspection Compatible (new regulation compliance)
Remarks
*The towing hook must be removed when installed
*Settings: For gasoline vehicles/hybrid vehicles
*When installing the rear half spoiler and muffler garnish, cutting and processing of the genuine bumper muffler part is required

[About titanium hybrid tail coloring]
* We are particular about the original texture of titanium Each tail is baked by hand, so there may be variations in the color of each tail.
In addition, there is some fading due to aging, which is typical of titanium.