Description

Product Name: rear arm skid guard
Compatibility: Suzuki Jimny JB64 and Suzuki Jimny Sierra JB74
Product number: 3018-43R / right-and-left set

Material: Steel (thickness T = 3.2mm)
Finish: Unichrome Plating Finish
Installation: Bolt-on mounting (with drilling for rear)
Vehicle inspection: Vehicle inspection compatible product

Covers the pivot part of the trailing arm.
By skidding on obstacles, damage and deformation are prevented and running performance is improved.
Comes with a stepped collar to prevent rattling, so there is no rattling when driving.

For the rear, a long bolt set to prevent inversion is attached, one set each on the left and right. It is necessary to make a hole in the frame pivot part to install this bolt.

Stepped spacer attached to the product

There is a bulge in the frame where the arm skid guard is attached, and there will be a gap when the skid guard is put on. Even if you try to install it without filling this gap, you will not be able to tighten the bolts and looseness will occur. Apio comes with a stepped collar that fills the gap and can be securely attached.

Isn’t it okay to just pinch the washer? I think, but it is difficult except to put a washer between the frame and the skid guard and pass the bolt through. The stepped collar can be inserted from the outside of the product body, making it easy to install.

The necessity of arm skid guard (image is Jimny JB23)

About installation
It is a bolt-on installation that is fastened together with the hunting bumper. Here is the installation manual