Apio Shizuka Gozen Muffler for JIMNY JB74
Product Code : 2004-03S
Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping, we may request an additional shipping charge after the buyer places the order.
Product name: Shizuka Gozen muffler (for JB74)
Compatible with: Suzuki Jimny Sierra JB74 genuine rear bumper (MT/AT compatible)
* Cannot be used with Apio transfer guard
Product number: 2004-03S
Material: Stainless steel (only the flange is steel)
Outlet diameter: 76.3mm
Pipe diameter: Rear piece 42.7mm/50.8mm
Center pipe 42.7mm
Front piece 42.7mm
Vehicle inspection: Compatible with vehicle inspection (new standard compatible)
Both AT and MT vehicles conform to the muffler pre-certification system
Country of manufacture: Japan (Made in Japan)
Since there is no interference with the Suzuki genuine optional mud flap, it can be used together.
Thick sports muffler sound with bass effect
JB74 MT vehicle proximity noise level: 86.0db
JB74 MT vehicle acceleration noise level: 73.0db
JB74 AT vehicle proximity noise level: 80.0db
JB74 AT vehicle acceleration noise level: 75.0db
Both manual and automatic cars have low noise levels, but you can enjoy a sporty sound with very deep bass.
The sound during idling is extremely quiet, and this muffler is recommended for owners who are concerned about idling noise in their living environment.
Dynapack power tester results
Dynapack power test graph
Measured with a Dynapack power tester on the same vehicle with the genuine muffler and with the Shizuka Gozen muffler installed.
When the Shizuka Gozen muffler is installed, the power is higher than the stock muffler from the low rotation range to the high rotation range, and the torque is also higher in almost all areas, so it is comfortable even in towns where there are many stop-and-go.
In comparison to the power peak value, the genuine 85PS, Shizuka Gozen muffler is 87.32PS. The difference is 2.32PS, which is a big improvement!
Features of Shizuka Gozen muffler for Jimny Sierra JB74
[Compatible with genuine bumpers and Apio bumpers]
Can be installed on Jimny Sierra JB74 genuine rear bumper without processing!
With exquisite thickness and handling, it matches not only the genuine bumper but also the combination with the Apio tactical rear bumper without any discomfort.
Although it is a simple exit that suppresses claims, the muffler sound that can be heard from there is not the genuine ratio.
Unlike JB64, Jimny Sierra JB74 has a silencer on the genuine front pipe. Our company’s muffler “Shizuka Gozen” for JB74 has replaced the front muffler, and has a three-part structure of “front muffler”, “center pipe” and “rear muffler”. Exhaust efficiency has been greatly improved, and a 1.5L naturally aspirated vehicle has achieved an increase of more than 2 horsepower.
・2 plate gaskets
・1 mounting stay
・1 TOTSUGEKI sticker
[Proof of compliance with the new standard “certification plate”]
Both Jimny JB74-MT and AT vehicles have passed the pre-test and are compatible with the pre-certification system of the new muffler standard. A certification plate is welded to the product.
[ Curl end and tone hole ]
The outlet has a double pipe structure that is also a feature of the Apio muffler. It is safe because the outer cylinder does not become hot. In addition, the curled end method with the outlet part rolled inward will not hurt your clothes or skin even if it comes in contact with it.
A tone hole is installed at the bottom of the outer cylinder to eliminate the muffled exhaust sound.
[Built-in “jet stream fin”]
The jet stream fin, which is the biggest feature of the series, is installed inside the Apio Shizuka Gozen muffler series.
In the low rpm range, it prevents over-disengagement and increases torque, and in the middle and high rpm range, it creates a vortex effect on the exhaust, greatly increasing the exhaust flow velocity. This effect achieves a wonderful blow-up and response.
In addition, the inner part of the muffler is made of stainless steel mesh, which has excellent corrosion resistance and is wrapped in super glass wool to achieve both excellent exhaust efficiency and noise reduction effect.
[Packing size and packing weight]
Packing size: 140cm x 29.5cm x 30cm (200 size)
Packing weight: Approximately 14kg
You may also like…
Jimny JB64, Jimny JB74
for Jimny & Jimny Sierra (Wide body type)