Description

FRONT UNDER SPOILER – 56,200 yen
[Size] 10mm DOWN
Material: FRP Un Painted
* This product is installed at the bottom of the genuine bumper.
* Cannot be installed at the same time as the genuine optional mudguard.

SIDE UNDER SPOILER – 54,000 yen
Material: FRP Un Painted
[Size] F: 30mm DOWN R: 40mm DOWN
* This product is attached to the bottom of the genuine side step.
* Cannot be installed at the same time as the genuine optional mudguard.
* Drilling is required on the bottom of the side step.

REAR UNDER DIFFUSER 4P – 59,500 yen
Material: FRP Un Painted
[Size] 30mm DOWN
* This product is installed at the bottom of the genuine bumper.
* Drilling is required on the bottom of the bumper.
* Rear center 2P + Rear side 2P

OTHER OPTIONAL PARTS

REAR GATE SPOILER – 48,500
Material: FRP Un Painted
It will be a product to be mounted on the genuine rear gate spoiler

LED BUMPER GARNISH 2P – 51,800 yen
Material: FRP Un Painted
[Accessories] 6 LED lights (1 LED light / 5 candela)
* This product is installed on the duct on the front bumper side.

OVER FENDER KIT 6P – 106,800 yen
Material: FRP Un Painted
[Size] 10mm WIDE 15mm DOWN
* 10mm wide and 15mm arch down.
* This product will be replaced with a genuine fender cover.
* Vehicle inspection support

Z`s SPORTS LINE DUAL 4 pieces (for HYBRID cars) ¥ 150,000
Z`s SPORTS LINE DUAL 4 pieces (for TURBO cars) ¥ 162,000

[Size] φ120 × 80 Oval
[Accessories] Gasket (φ50) x 1 M10 flange bolt / nut x 2 Mounting stay x 1 Hanging rubber x 3
* Available for ARTISAN aero and standard bumper.

Z`s SPORTS LINE DUAL 4 pieces – see the price above

CORART A5（20 × 8.5J +40）- 110,100 yen
[Accessories] Center cap/air valve
* DISK white / RIM buff alumite finish

NUMBER FRAME (CFRP twill / plain weave) – JPY 31,800
* BLACK LABEL plate included. * Character light type license plate cannot be installed. * Please specify from twill weave / plain weave.
* Carbon products are not in the final finished state, so we recommend a clear coat finish after temporary alignment.
We are using Toray (CO6347 BL1500-3K).

NUMBER PLATE BOLT SET (Silver / Matt Black) – JPY 3,500
* 3 bolts M6xP1.0 × 25mm, 1 wrench for Torx included
* It will be a product to replace the genuine bolt of the license plate.
By refreshing the design of the bolt surface, the impression around the front is refreshing and fashionable.
It is resistant to rust, and because it is a Torx hole bolt, it also helps prevent theft of the license plate.

ARTISAN SPIRITS LOCK&NUT KIT

[Kit contents] LUG NUT (21HEX) x 16PCS / LOCK NUT x 4PCS (with ARTISAN logo) / Key adapter (21 / 22HEX 2-stage key) x 1PCS