Description

FRONT UNDER SPOILER – 60,600 yen – DISCONTINUED
[Size] 12mm DOWN
Material: FRP Un Painted
* This product is installed at the bottom of the genuine bumper.
* Cannot be installed simultaneously as the genuine optional mudguard.

SIDE UNDER SPOILER – 60,000 yen
Material: FRP Un Painted
[Size] F: 30mm DOWN R: 40mm DOWN
* This product is attached to the bottom of the genuine sidestep.
* Cannot be installed simultaneously as the genuine optional mudguard.
* Drilling is required on the bottom of the sidestep.

REAR UNDER DIFFUSER 4P – 60,000 yen
Material: FRP Un Painted
[Size] 30mm DOWN
* This product is installed at the bottom of the genuine bumper.
* Drilling is required on the bottom of the bumper.
* Rear center 2P + Rear side 2P

OPTIONAL PARTS

REAR GATE SPOILER – 51,800
Material: FRP Un Painted
[Size] Width (center) 115 mm
* This product is mounted on the genuine rear gate spoiler.
* Please specify the grade.

REAR ROOF SPOILER – 56,200 yen
Material: FRP Un Painted
[Size] Width (center) 195 mm
* This product is installed on the genuine rear roof.

BUMPER GARNISH 2P – 51,800 yen
Material: FRP Un Painted
* This product is installed on the duct on the front bumper side.

OVER FENDER KIT 8P – 117,800 yen
Material: FRP Un Painted
[Size] 10mm WIDE 15mm DOWN
* 10mm wide and 15mm arch down.
* This product will be replaced with a genuine fender cover.
* Vehicle inspection support

ARTISAN SPIRITS × OZ SUPERTURISMO EVOLUZIONE – 114,400 yen
(20 × 8.5J +42 PCD 5-114.3）
[Accessories] Center lock style cover/air valve [Remarks]
* 1 PIECE/casting wheel
* Gloss black/red logo
* Center lock style cover for ARTISAN SPIRITS logo
* TPMS: Can be installed
* JWL / VIA standard: 750KG compliant product

NUMBER FRAME (CFRP twill / plain weave) – JPY 31,800
* BLACK LABEL plate included. * Character light type license plate cannot be installed. * Please specify whether it is from twill weave / plain weave.
* Carbon products are not finished, so we recommend a clear coat finish after temporary alignment.
We are using Toray (CO6347 BL1500-3K).

NUMBER PLATE BOLT SET (Silver / Matt Black) – JPY 3,500
* 3 bolts M6xP1.0 × 25mm, one wrench for Torx included
* It will be a product to replace the genuine bolt of the license plate.
By refreshing the design of the bolt surface, the impression around the front is refreshing and fashionable.
It is resistant to rust, and because it is a Torx hole bolt, it also helps prevent license plate theft.

ARTISAN SPIRITS LOCK&NUT KIT

[Kit contents] LUG NUT (21HEX) x 16PCS / LOCK NUT x 4PCS (with ARTISAN logo) / Key adapter (21 / 22HEX 2-stage key) x 1PCS