Description

FRONT HALF SPOILER – JPY 185,000 [ US$ 1,200]
NOT PAINTED.
Material: FRP
Size: Center: 37mm Down, Side: 57mm Down
Components
Front Half Spoiler (1 set)
Black Label Plate (1 piece)
M4x16 Screws (4 pieces)
Washers (4 pieces)
Covers (2 pieces)
Notes
This product is to be installed on top of the factory front bumper.
Installing the included mesh will reduce the clearance between the factory bumper and the mesh. We recommend using masking tape for protection.
Mudguards must be removed.

REAR HALF SPOILER – JPY 195,000 [ US$ 1,270]
NOT PAINTED.
Material: FRP
Size: Center: 37mm Down, Side: 57mm Down
Components
Front Half Spoiler (1 set)
Black Label Plate (1 piece)
M4x16 Screws (4 pieces)
Washers (4 pieces)
Covers (2 pieces)
Notes
This product is to be installed on top of the factory front bumper.
Installing the included mesh will reduce the clearance between the factory bumper and the mesh. We recommend using masking tape for protection.
Mudguards must be removed.

OVER FENDER – JPY 185,000 [ US$ 1,200]
NOT PAINTED.
Material: FRP
Size: Target width: 30-35mm wide (per side)
Components
*Front Over fender RH 1pc, LH 1pc
*Rear Over fender RH 2pcs, LH 2pcs
*M4x16 Screws 22pcs
*Washers 22pcs
Notes
*This product is fitted over the factory fender.
*Structural modifications required for installation.
*6-piece split structure
*Drilling required in the factory fender

REAR GATE SPOILER – JPY 95,000 [ US$ 320] / CARBON REAR GATE SPOILER – JPY 145,000 [ US$ 950]
NOT PAINTED.
Material: FRP or CARBON
Size: 70mm from the glass edge
Component Parts
*Rear Gate Spoiler: 1 piece
*Hole Seal: 2 pieces
Notes
*This product is to be installed on the factory rear gate panel.
*Carbon fiber products are not in their final finish, so we recommend applying a clear coat after trial fitting. Made with Toray (CO6347 BL1500-3K) fiber, this is a twill weave.

REAR ROOF SPOILER – JPY 105,000 [ US$ 680] / CARBON REAR GATE SPOILER – JPY 155,000 [ US$ 1,005]
NOT PAINTED.
Material: FRP or CARBON
Size: 152mm
Components: 1 Rear Roof Spoiler
2 Hole Seals
Notes: This product is intended for installation on the factory rear roof.
Carbon fiber products are not in their final finish, so we recommend applying a clear coat after trial fitting. Made with Toray (CO6347 BL1500-3K) twill weave.