Name: BATTLEZ Lift Up Set VFS Complete Jimny JB64 Series
Availability: InStock

BATTLEZ Lift Up Set VFS Complete Jimny JB64 Series

Product number: A734513Z

Please select per-product shipping when placing the order. This can be shipped via economy air shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered
with this shipping, we may request an additional shipping charge after the buyer places the order.
4.5% deduction when paying via Bank/WISE Payment

Description

Basic information

A complete set that includes a coil spring that uses a titanium compound material with a guaranteed setback, a high-performance damper equipped with a Harmoflex® mechanism, a lateral rod that compensates for deviation due to lift-up, and an assist kit.

Product content	Front coil spring, rear coil spring, front damper, rear damper, long brake hose, front lateral rod, rear lateral rod, assist kit, and leveler long bracket for vehicles equipped with LED headlamps
Vehicle height	Lift up front: 35-40mm, rear: 35-40mm

Spring

Wire diameter	Front 11Φ Rear 11.5Φ
spring rate	Front: 17.9N/mm, Rear: 22.8N/mm
Color	Silver

shock absorber

type	Low-pressure gas twin-tube damper, Harmoflex® mechanism
Damping force adjustment	fixed
damping force	Front: Extension side -14%, Compression side 8% (0.3m / sec / OEM ratio) Rear: Extension side 7%, Compression side -12% (0.3m / sec / OEM ratio)
stroke	Front: +21mm, Rear: +31mm
body diameter	Front: Ø45.0, Rear: Ø45.0
piston diameter	Front: Ø30.0, Rear: Ø30.0
Color	gray metallic

assist kit

content	Front caster bush, auxiliary jig for bush positioning

others

content	Comes with a leveler long bracket for vehicles equipped with LED headlamps. *It is not used in vehicles without LED headlamps, but it is included in this set.

Mounting information

Mounting method	genuine replacement
installation time	3.5 hours to 4 hours

Precautions/Supplementary Explanation

Comes with a warranty against wear and tear (coil spring only).
Need to replace the long brake hose. * Since brake hose replacement requires specialized knowledge, please replace it at a certified factory in the automobile disassembly and maintenance business.

Due to the lift-up, there is a possibility that the front side visibility standard (Section 44, Paragraph 5 of the safety standards) may not be met, and it may be necessary to add a forward visibility confirmation mechanism such as a front view camera.

Safety equipment such as driver assistance systems and collision avoidance systems of each automobile manufacturer may cause radars, cameras, sensors, etc. to misrecognize or malfunction due to changes in vehicle height. We are not responsible for any malfunctions of these systems due to changes in vehicle height due to our lift-up (or low-down) suspension installation, or accidents caused by malfunctions. Please note.

There is no interference between the front propeller shaft and the cross member by installing only our lift-up suspension.

Packing weight: 25.9 kgPackage sizes
H:410 × W:370 × D:370 mm
H:290 × W:240 × D:995 mm